Panasonic NA-F100A4

WashingDetergent
7
Washing
Preparation:
● Check if the washing machine is properly installed.
(P. 12)
● Turn on the water faucet.
1
After loading laundry
Turn the power on.
● The “Normal” program is selected when the
power is turned on.
2
Select a program. (P. 5)
Press the button repeatedly until
the desired program lights up.
■
Timer preset
3
Start.
The pulsator moves without
water and measures the amount
of laundry (approx. 5 seconds).
Water level indication
(approx. 5 seconds)
Remaining time indication
● To check the water amount
→Press “Water Level”.
4
According to the water amount indication
Put in detergent.
● Approx. 20 seconds after the water amount
is displayed, water supply begins.
Set how many hours later to nish
operation. (P. 4)
● 2 minutes after start, all indications except
turn off.
● To conrm after the timer has been set, press
.
● To cancel or change, press .
● The hours that can be set differ depending on
the program.
■
After pressing “Start”
● You can change the water level until the end of
the wash process.
● You can change each of the “Wash”, “Rinse”
and “Spin” operation contents until the end of
the wash process. Press “Pause” beforehand.
● You cannot change the program.
Timer preset
3
1
2
5
Close the lid.
Operation ends with beeps.
•
Operation panel of NA-F100A4