To Next Page
A
Anthony ChaseSep 23, 2025
What is the noise when water drains out of my Panasonic NA-F115A5 Washer?
- EEvan Ball MDSep 23, 2025
This is normal. It is the noise of the drain pump working in your Panasonic Washer.
What is the noise when water drains out of my Panasonic NA-F115A5 Washer?
This is normal. It is the noise of the drain pump working in your Panasonic Washer.
Why does my Panasonic NA-F115A5 Washer not start?
Your Panasonic Washer might not be starting due to several reasons: there could be a power failure, the lid might not be completely closed, the power fuse might have blown, the breaker could be tripped, the power plug might not be fully inserted, the water faucet might not be turned on, you might not have pressed “Start”, or the timer might be preset.
What to do if my Panasonic Washer is not supplying water?
Check if the water faucet is turned on, ensure there is no water outage, and inspect the water supply filter for clogs.
What to do if there is a water outage with my Panasonic NA-F115A5 Washer?
After water supply is recovered, remove the water supply hose, release turbid water from the faucet, and then start the Panasonic washing machine.
How to change process settings after start-up on my Panasonic Washer?
Process settings can be changed during the wash process of your Panasonic Washer by pressing “Pause”. To change the program or settings after the end of the wash process, turn the power off and on again.
Why is the water level too low in my Panasonic NA-F115A5 Washer?
With light clothes (of synthetic fibre, etc.), the water level in your Panasonic Washer may be lower.
What to do if there is a water outage for my Panasonic NA-F115A5 Washer?
When water supply is recovered, remove the water supply hose, release turbid water from the faucet, and then start the Panasonic washing machine.
Why is the water level too high in my Panasonic NA-F115A5 Washer?
If laundry is wet or there is water in the tub before operation, the water level in your Panasonic Washer may be higher.
Why is my Panasonic Washer adding water during the wash cycle?
If the water level drops during the wash process of your Panasonic Washer, water is added automatically. Additionally, with a large amount of laundry, water may be added several times automatically.
Why does my Panasonic Washer rotate irregularly during spin?
The tub rotation speed of your Panasonic Washer is adjusted to reduce foaming during spin.
Instructions on how to check and change the water amount during operation.
How to modify wash, rinse, and spin process combinations and durations.
Setting the time to finish washing in hours, with available ranges and exclusions.
Details on water levels, water amounts for different models, and detergent usage.
Guide on selecting hot, warm, or cold water for washing and its limitations.
Instructions for washing comforters and blankets, including material and weight limits.
General| Type | Top Load |
|---|---|
| Capacity | 11.5 kg |
| Water Level Selection | Yes |
| Fuzzy Logic Control | Yes |
| Child Lock | Yes |
| Frequency | 50 Hz |
| Color | White |
| Voltage | 220 V |
