Panasonic NA-F125A1

Order No. PAPTH141101CE
Service Manual
Fully Automatic Washing Machine
Product Colour
Destination
Stainless Colour (L)
Silver (S)
White (W)
Thailand, Malaysia
Singapore (Local)
Singapore (Export)
Vietnam
NA-F135X1
NA-F115X1
NA-F135A1
NA-F125A1
NA-F115A1
The service information is designed for experienced repair technicians only and is not designed for use by the general
public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting
to service a product. Products powered by electricity should be serviced or repaired only by experienced professional
technicians. Any attempt to service or repair the product or products dealt within this service information by anyone
else could result in serious injury or death.
WARNING
IMPORTANT SAFETY NOTICE
There are special components used in this equipment which are important for safety. These parts are marked by
in the Schematic Diagrams, Circuit Board Diagrams, Exploded Views and Replacement Parts List. It is essential that
thesecriticalpartsshouldbereplacedwithmanufacturer’sspeciedpartstopreventshock,reorotherhazards.Do
not modify the original design without permission of manufacturer.
© Panasonic Appliances (Thailand) Co., Ltd. 2014.
Allrightsreserved.Unauthorizedcopyingand
distribution is a violation of law.

Panasonic NA-F125A1 Specifications

General

Type	Top Load
Capacity	12.5 kg
Spin Speed	800 rpm
Water Level	10 levels
Weight	40 kg
Wash Programs	10 Programs
Energy Efficiency	A+++

Summary

Repair Work Safety

Electrical Safety and Component Integrity

Emphasizes precautions against electric shock, using specified parts, and avoiding rebuilding machine components.

Handling and Operational Precautions

Details safe practices for handling electrical connections, moving parts, and terminals during repairs.

Personal Protective Measures

Advises on wearing gloves and being cautious of sharp metal edges for personal safety.

Parts Identification Overview

Specifications

Technical Information

Standard Wash Capacity

Installation

Location Check and Preparation

Advises on selecting an appropriate location, avoiding specific environmental hazards.

Installation (Continued)

Water Supply and Power Connection

Step-by-step guide for connecting the water tap adaptor, supply hose, power plug, and grounding wire.

Leveling and Trial Operation

Guide on how to level the washing machine and perform a trial operation.

Operation Panel Layout and Functions

Washing Cycle Operation

Starting the Wash Cycle

Washing Options and Programs

ECONAVI Energy Saving Function

Details the ECONAVI system, its operation, and indicators for automatic adjustments.

Delicate and Blanket Wash Programs

Maintenance Procedures

Lint Filter Cleaning

Detailed steps for removing and cleaning the lint filter after each use.

Test Mode Procedures

Entering and Selecting Test Modes

Instructions on how to enter and select specific diagnostic test modes.

Machine Function Test Cycles

Details procedures M, G, and H for testing belt tension, error messages, and operation times.

Troubleshooting Guide

Time and Main Unit Issues

Water Supply and Level Problems

Spin Cycle and Other Malfunctions

Error Code Reference

U-Error Codes and Solutions

Details U-series error codes, their causes, and methods for clearing them.

H-Error Codes and Solutions

Details H-series error codes, their causes, and methods for clearing them.

Wiring Diagrams

Diagram for NA-F135 X1 NA-F115 X1

Diagram for NA-F135 A1 NA-F125 A1 NA-F115 A1

Disassembly Procedures

Controller Unit Replacement

Parts Identification and Lists

Exploded View - Part A

Exploded View - Part B

Exploded View - Part C

Replacement Parts List - Part A

Replacement Parts List - Part B

Replacement Parts List - Part C