What to do if my Panasonic Washer won't start?
If your Panasonic Washer isn't starting, check the following: Is there a power failure? Is the lid completely closed? Has the power fuse blown or the breaker tripped? Is the power plug fully inserted? Is the water faucet turned on? Did you press “Start”? Is the timer preset?
What to do if my Panasonic Washer is not supplying water?
Check if the water faucet is turned on and ensure there isn't a water outage. Also, inspect the water supply filter for clogs.
How to change process settings on Panasonic NA-F150A5 after starting?
You can change process settings during the wash cycle by pressing “Pause”. To change the program or settings after the wash cycle has ended, turn the power off and then on again.
What to do if my Panasonic NA-F150A5 has a power failure or the breaker trips?
The Panasonic Washer will automatically resume operation from where it stopped once the power is restored (Auto Restart).
Why is there irregular rotation during spin in my Panasonic Washer?
The tub rotation speed is adjusted to reduce foaming during spin.
Why is my Panasonic NA-F150A5 Washer operation time longer than indicated?
The washing cycle might take longer than expected if the laundry is concentrated on one side or if the water supply or drainage isn't working well.
Why does my Panasonic NA-F150A5 keep adding water during the wash cycle?
If the water level drops during the wash cycle, the Panasonic Washer automatically adds more water. Also, with a large load of laundry, water may be added several times automatically.
What to do if my Panasonic NA-F150A5 operation suddenly changes to rinse in the middle of spin?
If clothes are concentrated on one side of the tub, the Panasonic Washer automatically corrects unevenness by starting the rinse process. To resolve this, place clothes as evenly as possible.
What to do if there is a water outage during Panasonic NA-F150A5 Washer operation?
When the water supply is restored, remove the water supply hose and release any turbid water from the faucet before restarting the washing machine.
Why is the water level too high in my Panasonic Washer?
If the laundry is already wet or there's water in the tub before starting the cycle, the water level may appear higher than expected.
General| Type | Top Load |
|---|---|
| Capacity | 15 kg |
| Control Type | Electronic |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Aqua Spin Rinse | Yes |
| Dancing Water Flow | Yes |
| Auto Power Off | Yes |
| Child Lock | Yes |
| Spin Speed | 800 RPM |
| Wash Programs | Normal, Speedy, Baby Care, Delicate, Tub Clean, Blanket, Jeans, Strong Wash, Soak Wash, Air Dry |
| Washing Programs | 10 (Normal, Speedy, Baby Care, Delicate, Tub Clean, Blanket, Jeans, Strong Wash, Soak Wash, Air Dry) |
To Next Page