Panasonic NA-F115X1 - User Manual

Questions and Answers

A
Angela CharlesAug 9, 2025
What to do if my Panasonic Washer has no water supply?
- T
  Tyler KennedyAug 9, 2025
  First, check if the water faucet is turned on. Consider whether there is a water outage in your area. Also, inspect the water supply filter for any clogs. Note that with a large amount of laundry, water is added several times automatically. If laundry is wet or there is water in the tub before operation, the water level may be higher. With light clothes (of synthetic fibre, etc.), the water level may be lower.
J
jbarrettAug 17, 2025
Why does my Panasonic Washer start with rinse, but no water is supplied?
- J
  Johnny OrozcoAug 17, 2025
  If there is no water in the tub, water is supplied after spin. If there is water in the tub, water is supplied after water discharge. Also, if clothes are concentrated on one side of the tub, the washing machine automatically corrects unevenness by starting rinse process, so place clothes as evenly as possible. The tub rotation speed is also adjusted to reduce foaming during spin.
T
Travis RodriguezAug 25, 2025
What happens if there is a power failure with my Panasonic NA-F115X1?
- D
  David BrooksAug 25, 2025
  The operation will resume from the point where it was stopped when the power is recovered (Auto Restart). When water supply is recovered, remove the water supply hose, release turbid water from the faucet, and then start the washing machine. Note that if Child Lock is set, the Fragrance program cannot be selected.
C
Clifford GuerraSep 1, 2025
Why does the time indication increase or not decrease on my Panasonic NA-F115X1?
- K
  keith24Sep 1, 2025
  The time indication is approximate and is corrected during operation and displayed. The operation time may be longer if laundry is concentrated on one side or the water supply or drainage is not good. (Error Display "U11", "U14")

Summary

Repair Work Security and Safety

Safety Precautions for Repair Work

Essential safety guidelines and warnings for technicians performing repairs.

Installation Guide

Operation Panel Guide

Washing Process

Washing Options

ECONAVI Functionality

Explanation of the ECONAVI feature for automatic adjustment of wash time and water amount.

Maintenance Procedures

Service Test Modes

Test Mode Procedures A-E

Detailed steps for performing test procedures 0 through 3, covering buzzer, operation, and water detection.

Test Mode Procedures M-H

Instructions for test procedures 4 through 6, focusing on belt tension, error messages, and operation times.

Troubleshooting Common Issues

Time and Operation Problems

Troubleshooting for time indications and operation interruptions.

Supply, Rinse;Spin, and Other Issues

Addressing issues related to water supply, rinse/spin cycles, power, and program selection.

Error Code Reference

U-Error Indications and Solutions

Explanation of U-Error codes (U11-U99) and methods to resolve them.

H-Error Indications and Solutions

Explanation of H-Error codes (H01-H21) and methods to resolve them.

Component Disassembly

Controller Unit Disassembly Procedure

Panel Face B Disassembly Procedure

Parts Identification and Replacement

Part A: Exploded View and Parts List

Part B: Exploded View and Parts List

Part C: Exploded View and Parts List

Panasonic NA-F115X1 Specifications

General

Style	Top-Loading
Color	Silver
Washer Capacity	13.5 kg
Dryer Capactity	-
Max Spin Speed	710 RPM
Spin Speeds	2
Spin Class	E
Number of Cycles	8
Cycle Selections	Colors
Wash	Spin Only
Options	less ironing
No spin and No heat	Self Clean
Hours	Extra Rinse
Noise level	-
Temperature Selections	-
Energy Class	-
Annual Energy Consumption	147 kWh
Annual Water Consumption	-
Water Consumption Per Cycle	93 L
Voltage	240 V
Frequency	50 Hz
Current	-