M
Michael GilbertSep 8, 2025
Why is there noise when water drains out of my Panasonic NA-F115A5 Washer?
- DDr. Reginald StantonSep 8, 2025
This is normal. The noise you hear when water drains out of your Panasonic Washer is the drain pump working.
To Next PageTo Next PageWhy is there noise when water drains out of my Panasonic NA-F115A5 Washer?
This is normal. The noise you hear when water drains out of your Panasonic Washer is the drain pump working.
Why does my Panasonic NA-F115A5 Washer operation take longer than indicated?
The operation time of your Panasonic Washer may be longer if laundry is concentrated on one side or if the water supply or drainage is not working properly.
Why does my Panasonic NA-F115A5 start with rinse when I only want to spin?
If clothes are concentrated on one side of the tub, the Panasonic Washer automatically corrects unevenness by starting the rinse process. To avoid this, place clothes as evenly as possible.
Why is water supplied in the middle of the wash process in my Panasonic NA-F115A5?
If the water level drops during the wash process of your Panasonic Washer, water is added automatically. Additionally, with a large amount of laundry, water may be added several times automatically.
Why does my Panasonic Washer rotate irregularly during spin?
The tub rotation speed of your Panasonic Washer is adjusted to reduce foaming during spin.
How to change process settings on Panasonic NA-F115A5 after start-up?
Process settings can be changed during the wash process by pressing “Pause”. To change the program or settings after the end of the wash process, turn the power of your Panasonic Washer off and on again.
Why does the Panasonic NA-F115A5 supply water during wash process?
If the water level drops in your Panasonic Washer, water is added automatically. Also, with a large amount of laundry, water is added several times automatically.
Why does the Panasonic NA-F115A5 Washer change to rinse in the middle of spin?
If clothes are concentrated on one side of the tub in your Panasonic Washer, the machine automatically corrects unevenness by starting the rinse process. To prevent this, place clothes as evenly as possible.
Why is there irregular rotation during spin in my Panasonic NA-F115A5 Washer?
The tub rotation speed of your Panasonic Washer is adjusted to reduce foaming during spin.
How to change process settings after start-up on my Panasonic Washer?
Process settings can be changed during the wash process of your Panasonic Washer by pressing “Pause”. To change the program or settings after the end of the wash process, turn the power off and on again.
General| Type | Top Load |
|---|---|
| Capacity | 11.5 kg |
| Water Level Selection | Yes |
| Fuzzy Logic Control | Yes |
| Child Lock | Yes |
| Frequency | 50 Hz |
| Color | White |
| Voltage | 220 V |
Instructions on how to check and change the water amount during operation.
How to modify wash, rinse, and spin process combinations and durations.
Setting the time to finish washing in hours, with available ranges and exclusions.
Details on water levels, water amounts for different models, and detergent usage.
Guide on selecting hot, warm, or cold water for washing and its limitations.
Instructions for washing comforters and blankets, including material and weight limits.
