To Next PageTo Next PageWhat to do if my Panasonic NA-F65G6 Washer has no operation?
If your Panasonic Washer isn't operating, check these things: ensure there wasn't a power failure, and that the lid is completely closed. Also, verify that the power fuse hasn't blown or the breaker tripped, and that the power plug is fully inserted. Make sure the water faucet is turned on, you pressed 'Start,' and the timer reservation isn't set.
What to do if my Panasonic NA-F65G6 displays an error indication for past two times?
If your Panasonic Washer displays an error, it will initially show [E]. Press the [Power Soak] button to switch between the last error and the error before that, returning to [E] as the initial mode. If there were previous abnormal alarms, [U] or [H] along with a number will be displayed. Note that [U12], [H15], and abnormal test checks are not recorded.
Why is there no water supply to my Panasonic Washer?
If your Panasonic Washer isn't getting water, make sure the water faucet is turned on and that there isn't a water outage. Also, check if the water supply filter is clogged with dirt.
How to resume operation after a power failure with Panasonic Washer?
After a power failure, your Panasonic Washer will automatically resume operation from where it stopped, thanks to the Auto Restart function.
Why does the time indication on my Panasonic NA-F65G6 increase or not change?
The operation time on your Panasonic Washer may increase or not change if the laundry is concentrated on one side, or if the water supply or drainage isn't working well.
Why does my Panasonic Washer operation suddenly change to rinse?
If your Panasonic Washer suddenly switches to the rinse cycle, it's likely because the clothes are concentrated on one side of the tub. The machine automatically corrects this imbalance by starting the rinse process. Try to place clothes as evenly as possible.
What to do if there is a water outage during a Panasonic NA-F65G6 cycle?
If there's a water outage during a Panasonic Washer cycle, when the water supply returns, remove the water supply hose, release any turbid water from the faucet, and then restart the washing machine.
What to do if Panasonic NA-F65G6 starts with rinse but no water is supplied?
If your Panasonic Washer starts with the rinse cycle but no water is supplied, water will be supplied after the spin cycle if there is no water in the tub. If there is water in the tub, water will be supplied after water discharge.
How to check the running number on my Panasonic Washer?
Initially, [C] will be displayed on your Panasonic Washer. Press the [Power Soak] button to change the displayed digit of operation times. Press once to see the Thousands-Hundreds digits (e.g., [12] for 1234), and press twice for the Tens-Ones digits. The running number counts all [Wash Rinse Spin] processes. When the count exceeds 9999 times, only the Thousands digit is shown, continuing from [A000] to [A999].
General| Type | Top Load |
|---|---|
| Capacity | 6.5 kg |
| Spin Speed | 700 rpm |
| Programs | 8 |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Wash Programs | Delicate, Soak |
Guideline for detergent amount based on water level indication.
Displays water level during operation and approximate remaining time.
Allows selection of hot, warm, or cold water for washing.
Option to adjust the water level during the wash process.
Set the time to finish washing, available in hourly increments.
Automatically adjusts operation time and water level based on detected laundry and water temperature.
Instructions on correctly adding detergent, bleach, and softener to the machine.
Guidelines for using bleach, including precautions for colored clothes.
Details on automatic softener release during the final rinse process.
Function to set the desired finish time for the washing cycle.
Program for gently washing delicate clothes and stylish garments.
Program for gently washing delicate clothes and stylish garments.
Program designed for washing bed sheets made of synthetic fibre or cotton.
Program for washing heavily soiled laundry with presoaking.
Removes water from clothes using air blown from tub rotation.
Allows custom selection of wash, rinse, and spin processes.
Method to cancel the end-of-cycle buzzer sound.
Function to prevent accidental operation by children, with water flush warning.
Procedure to manually turn the tub for accessing inlets or filters.
Instructions for removing and cleaning the lint filter after each operation.
Procedure to clean the water supply filter if water flow is restricted.
Program for cleaning the inside of the tub to prevent mould and smell.
Guidance on wiping the main unit and lid with a soft cloth.
Important considerations for choosing a suitable and stable installation site.
Steps to attach the bottom cover of the washing machine.
Instructions for connecting the external drain hose correctly.
Detailed steps for connecting water supply hoses to the tap and machine.
Procedure for connecting the power plug and essential grounding.
How to adjust the machine's legs to ensure it is stable and does not wobble.
Steps for running a test cycle to check for leaks or abnormal sounds.
Troubleshooting steps for incorrect or unchanging time displays.
Solutions for problems related to the machine not operating at all.
Addressing problems with water supply, level, or supply during the wash cycle.
Resolving issues during rinse or spin, like incorrect process changes.
Troubleshooting for irregular spin, power trips, or water outages.
Information on responsible disposal of the product as e-waste.
Troubleshooting steps for drain hose issues causing water not to drain.
Solution for the error indicating the washing machine lid was left open.
Resolving issues where spin or Air Dry functions cannot be performed.
Steps to resolve errors related to no water supply to the machine.
Procedure for errors caused by draining due to lid open with Child Lock.
Actions to take when a critical 'H' error code appears, requiring service.
