To Next PageTo Next PageWhy is there irregular rotation during spin in my Panasonic NA-F65V7?
If you're experiencing irregular rotation during the spin cycle of your Panasonic Washer, it's because the tub rotation speed is automatically adjusted to reduce foaming.
Why does the time indication increase or not change on my Panasonic NA-F65V7?
If the operation time displayed on your Panasonic Washer increases or doesn't change, it might be because the laundry is concentrated on one side or the water supply or drainage isn't working well.
Why does my Panasonic NA-F65V7 switch to rinse during spin?
If your Panasonic Washer starts rinsing in the middle of a spin cycle, it's likely because the clothes are concentrated on one side of the tub. The machine automatically corrects this unevenness by initiating a rinse process.
Why is the water level low in my Panasonic Washer?
If the water level in your Panasonic Washer seems too low for the amount of laundry, it could be due to washing light clothes, such as those made of synthetic fiber. Also, if there is no water in the tub, water is supplied after spin.
Why is my Panasonic Washer showing no operation?
If your Panasonic Washer is showing no operation, it could be due to several reasons: the power plug may not be fully inserted, the water faucet might not be turned on, you may have not pressed the “Start” button, or the timer reservation could be set.
Why does my Panasonic Washer start with rinse but no water supply?
If your Panasonic Washer starts with a rinse cycle but doesn't supply water, it's because water is supplied after water discharge if there is already water in the tub.
Why is the water level too high in my Panasonic NA-F65V7?
If the water level in your Panasonic Washer is too high for the amount of laundry, it's likely because the laundry is wet or there was water in the tub before starting the operation.
What happens if there is a power failure with my Panasonic Washer?
If your Panasonic Washer experiences a power failure, it will automatically restart and resume operation from where it was stopped once the power is restored, thanks to the Auto Restart feature.
What to do if there is a water outage with my Panasonic NA-F65V7 Washer?
If you're experiencing a water outage while using your Panasonic Washer, when the water supply is restored, remove the water supply hose and release any turbid water from the faucet before restarting the machine.
General| Capacity (Wash) | 6.5 kg |
|---|---|
| Spin Speed | 700 RPM |
| Frequency | 50 Hz |
| Water Level Settings | 6 |
| Water Level Selection | Yes |
| Fuzzy Logic Control | Yes |
| Child Lock | Yes |
| Type | Top Load |
Regular cleaning of the lint filter to maintain performance.
Cleaning the water supply filter to ensure proper water flow.
Using Air Dry and Tub Hygiene programs for internal cleaning.
Selecting an appropriate location and attaching the bottom cover.
Correctly connecting and positioning the external drain hose.
Troubleshooting common error codes displayed on the panel.
Resolving issues like no operation, slow draining, or no water supply.
Addressing problems with spin cycles, rinse, or irregular rotation.
Troubleshooting Stain Master effectiveness and detergent undissolving.
