To Next PageTo Next PageWhy is there irregular rotation during spin in my Panasonic NA-F65S7?
If you're experiencing irregular rotation during the spin cycle of your Panasonic Washer, it's because the tub rotation speed is automatically adjusted to reduce foaming.
Why does the time indication increase or not change on my Panasonic Washer?
If the operation time displayed on your Panasonic Washer increases or doesn't change, it might be because the laundry is concentrated on one side or the water supply or drainage isn't working well.
Why does my Panasonic NA-F65S7 switch to rinse during spin?
If your Panasonic Washer starts rinsing in the middle of a spin cycle, it's likely because the clothes are concentrated on one side of the tub. The machine automatically corrects this unevenness by initiating a rinse process.
Why is the water level low in my Panasonic NA-F65S7?
If the water level in your Panasonic Washer seems too low for the amount of laundry, it could be due to washing light clothes, such as those made of synthetic fiber. Also, if there is no water in the tub, water is supplied after spin.
Why is my Panasonic NA-F65S7 showing no operation?
If your Panasonic Washer is showing no operation, it could be due to several reasons: the power plug may not be fully inserted, the water faucet might not be turned on, you may have not pressed the “Start” button, or the timer reservation could be set.
Why does my Panasonic Washer start with rinse but no water supply?
If your Panasonic Washer starts with a rinse cycle but doesn't supply water, it's because water is supplied after water discharge if there is already water in the tub.
Why is the water level too high in my Panasonic NA-F65S7 Washer?
If the water level in your Panasonic Washer is too high for the amount of laundry, it's likely because the laundry is wet or there was water in the tub before starting the operation.
What happens if there is a power failure with my Panasonic NA-F65S7 Washer?
If your Panasonic Washer experiences a power failure, it will automatically restart and resume operation from where it was stopped once the power is restored, thanks to the Auto Restart feature.
What to do if there is a water outage with my Panasonic Washer?
If you're experiencing a water outage while using your Panasonic Washer, when the water supply is restored, remove the water supply hose and release any turbid water from the faucet before restarting the machine.
General| Type | Top Load |
|---|---|
| Capacity | 6.5 kg |
| Water Level Selection | Yes |
| Fuzzy Logic Control | Yes |
| Child Lock | Yes |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Color | White |
| Loading Type | Top Loading |
Safety advice regarding potential hydrogen gas explosion risks with hot water heaters.
Guidance on preventing fire or electric shock by avoiding humid installation locations.
Precautions for safe handling of the power plug and cord to prevent fire or electric shock.
Instruction to avoid self-disassembly, repair, or modification, advising to contact service center.
Warning to keep flammable materials and clothes away from the appliance to prevent explosion or fire.
Caution to avoid injury by ensuring the tub stops completely before touching it.
Recommendation to ensure proper grounding to prevent electric shock from short circuits.
Advice on selecting a suitable and stable installation location for the washing machine.
Steps for attaching the bottom cover to the washing machine.
Instructions for connecting the external drain water hose correctly.
Procedure for connecting the water supply adaptor and hoses to the water faucet.
Guidance on connecting the power plug and the importance of grounding.
How to adjust the machine's legs to ensure it is stable and does not wobble.
Steps for conducting a trial operation to check for leaks and abnormal sounds.
