14
7. TROUBLESHOOTING
7.1 Table of Troubleshooting
Control panel
Water Inlet Valve
Water level sensor
Safety switch
Gear motor
Capacitor
Mechanism case
Holding spring
Packing valve
Corresponding device
Problem
(have to check)
Others
Machine
doesn’t work
No light at the dial 0
Dial light is on 0 0
Unusual
amount of
water inside
machine
No sound of water from inlet valve
0 0
There is sound of water from inlet valve
Check water
supply
Not enough water flow
Check water
supply
Water never stops flowing in
0 0 0
Washing
system
doesn’t work
Pulsator does not spin (no sound of motor) 0 Motor
Pulsator does not spin (there is sound of
motor)
0 0 Belt, Motor
Pulsator spins only one way 0 0 Pulley, Motor
Pulsator spins slowly 0 Belt, Motor
Unusual
draining
No draining 0
Drains slowly 0 0 0
Unusual
spinning
system
No spinning (no sound of motor) 0
No spinning (Pulsator spins) 0 0
No force in spinning (tub spins slowly) 0
Unusual loud
noise
Loud noise during washing Belt, Motor
Loud noise during dry spinning 0 Check installation
Water leak Water leaks from drain pipe 0 0 Something clogged
Water leaks at the bottom of machine
Drain pipe A,
Pulsator
Incorrect
working
Water is supplied during spinning Unbalanced tub,
leaning
Rinses more than 3 times 0 0 Unbalanced tub,
leaning
Pulsator spins despite no water 0 Air pipe clogged
Cannot change function program 0 0 Description of
usage
Water does not flow out of a filter
Description of
usage
No overflow during water filling as rinsing Description of
usage
Selected washing program cannot be memorized Description of
usage
Fabric softener flows away too fast
Description of
usage
Pulsator spins in short range as washing and rinsing Description of
usage
Works at low wash level then supplies water again Description of
usage
To Next Page
Loading...
