To Next PageTo Next PageWhy is my Panasonic Washer not supplying water?
If your Panasonic Washer is not supplying water, ensure that the water faucet is turned on and check for a water outage. Also, the water supply filter might be clogged with dirt.
Why does my Panasonic NA-F80VB7 start with rinse when I select only spin?
If your Panasonic Washer starts with a rinse when you only want a spin, the tub rotation speed is being adjusted to reduce foaming during the spin cycle.
What to do if my Panasonic NA-F80VB7 Washer changes to rinse in the middle of spin?
If your Panasonic Washer's operation suddenly changes from Rinse/Spin to the rinse process mid-spin, it's likely because the clothes are concentrated on one side of the tub. The machine automatically corrects this unevenness by initiating a rinse process. To prevent this, try to place clothes as evenly as possible.
Why is the water level too high in my Panasonic Washer?
If the water level in your Panasonic Washer is too high for the amount of laundry, it may be because the laundry was already wet or there was water in the tub before starting the operation.
Why is the water level too low in my Panasonic NA-F80VB7 Washer?
If the water level in your Panasonic Washer is too low for the amount of laundry, it may be because you are washing light clothes (of synthetic fibre, etc.).
Why does my Panasonic NA-F80VB7 Washer start with rinse but no water is supplied?
If your Panasonic Washer starts operation with rinse, but water is not supplied, water is supplied after spin if there is no water in the tub. If there is water in the tub, water is supplied after water discharge.
What to do if my Panasonic NA-F80VB7 main unit is not operating?
If your Panasonic Washer's main unit isn't operating, several factors could be at play. First, ensure the lid is completely closed. Check if a power failure has occurred, or if the power fuse has blown or the breaker tripped; make sure the power plug is fully inserted. Also, verify that the water faucet is turned on and that you've pressed the “Start” button. Finally, check if the timer is preset.
Why does the time indication increase or not change on my Panasonic NA-F80VB7 Washer?
If your Panasonic Washer's time indication increases or does not change, note that the time indication is approximate. The remaining time is corrected during operation and displayed.
General| Type | Top Load |
|---|---|
| Capacity | 8 kg |
| Weight | 36 kg |
| Power Consumption | 420 W |
| Child Lock | Yes |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Dimensions | 560 x 600 x 1000 mm |
| Dimensions (W x D x H) | 560 x 600 x 1000 mm |
Guidelines for safe use and maintenance of the power plug and cord to prevent electric shock and fire hazards.
Rules for safe operation, including child supervision, fire prevention, and avoiding contact with moving parts.
Overview of the operation panel displays, including water level, detergent volume, and remaining time indicators.
Explanation of panel buttons, Auto Restart, and Power On/Off functions for user interaction.
Details on washing programs, their purposes, and maximum load capacities for different models.
Essential pre-wash checks for clothes and laundry nets to ensure safe and effective washing.
Instructions on how to properly add detergent, bleach, and softener based on water level and program selection.
Detailed instructions for operating the washing machine, from preparation to completing the wash cycle.
Guidance on using the timer preset function and specific program notes for Fragrance program.
Instructions for using the Delicate program for gentle washing of delicate garments and laundry nets.
Guidelines for washing blankets, including material requirements, weight limits, and net usage.
Explanation of the Air Dry function for removing water from clothes using air circulation.
Instructions for using the Wash/Rinse/Spin cycles, including process setting adjustments.
How to cancel the end buzzer and set or cancel the Child Lock feature for safety.
Instructions on how to turn the tub manually, particularly for accessing the softener inlet.
Procedure to clean the water supply filter to ensure smooth water flow and prevent splashing.
How to wipe the main unit and lid with a soft cloth or neutral detergent to remove stains.
Instructions for weekly and monthly tub cleaning using Air Dry and Tub Hygiene programs.
Guidance on selecting an installation location and attaching the bottom cover and drain hose.
Instructions for connecting the water supply hose, power plug, and performing final checks like wobble and trial operation.
Troubleshooting common problems related to operation time, no operation, and main unit malfunctions.
Solutions for issues occurring during the wash, rinse, or spin cycles, including water supply and rotation problems.
Addressing other operational issues like power failures, water outages, program selection errors, and process interruptions.
Troubleshooting codes U11 (drainage), U12 (lid open), and U13 (spin/air dry impossible).
Troubleshooting codes U14 (water supply) and U99 (forcible drain) with corrective actions.
Guidance for the 'H' error code, indicating a need for service inspection.
