Why my Panasonic NA-F80B1 Washer does not run at all?
If your Panasonic Washer isn't running, first ensure the power plug is fully inserted. Then, check your power fuse and breaker. Also, make sure the water faucet is turned on and that you've pressed the START/HOLD button. Finally, verify that the machine hasn't been programmed under the RESERVE timer.
How to fix Panasonic NA-F80B1 Washer when water is not supplied?
If water is not being supplied to your Panasonic Washer, start by checking if the water faucet is turned on and if the water supply has been cut off. Also, inspect the water supply hose connection for any clogs with dirt. Ensure that the lid is closed properly.
What to do if buzzer sounds and draining when opening the lid during wash and rinse on Panasonic NA-F80B1 Washer?
If your Panasonic Washer buzzer sounds and drains when you open the lid during wash and rinse, it's likely due to the CHILD LOCK mode being activated. To resolve this, unplug the power cord from the outlet, wait 5 seconds, and then plug it back in.
Details fuzzy logic system for clothes quantity, wash level, and detergent indication.
Describes the operations panel for NA-F80H1 and NA-F90H1 models.
Lists problems, corresponding devices, and potential causes for troubleshooting.
Details common symptoms that are not actual malfunctions.
Diagram showing the location of major components labeled as List A.
Lists part numbers and availability for NA-F80B1 model.
Lists part numbers and availability for NA-F80T1, NA-F90T1, NA-F1011T models.
Lists part numbers and availability for NA-F80H1, NA-F90H1 models.
Diagram showing the location of components labeled as List B.
General| Type | Top Load |
|---|---|
| Capacity (Wash) | 8.0 kg |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Water Level Selection | Yes |
| Fuzzy Logic Control | Yes |
| Child Lock | Yes |
To Next Page