- 10 -
5.2 NA-F70H1 / NA-F821H
NA-F70T1 / F7OT1P / F70H1 / F821H
Fuzzy logic control is used to recommend the proper water level and amount of detergent for
the amount of laundry being done.
Caution: If you need to change the [PROGRAM] and [SOAK] settings after the cycle has already started,
turn the power off and on it back.
SOAK
• Operations course for heavily washed laundry.
• You can adjust soak time based on the
condition of dirt.
• You can choose your soak time from 1, 3, 5,
8 hours.
OFF/ON
• The power automatically turns off when total
operations is finished.
• The power automatically turns off if [START/
HOLD] button is not pressed within 10
minutes after turning on the power.
PROCESS
• Press to select WASH only, WASH and RINSE
or other individual functions.
WATER LEVEL
(Water volume display)
• The appropriate WATER LEVEL for the size
and type of your laundry will be displayed.
• You can adjust the WATER LEVEL according
to your desired level.
START/HOLD
• Press this to start.
• Press this to stop in the middle of the cycle.
PROGRAM
(Course Select)
• According to type of laundry and stain, you
can select suitable course yourself.
TIME DISPLAY
• When the machine is in operation, the time
display shows how much time (in minutes) is
left.
• When the programmable timer has been
set, this display shows how much time is
left until the wash is finished by pressing the
[RESERVE] button.
• Timer indication on the panel will show longer
time than selected time as it includes water
feeding, draining, etc.
RESERVE
• Press the [RESERVE] button to set how many
hours later you would like the wash to be
completed.
To Next Page
Loading...
