What to do if my Panasonic Washer has an unusual amount of water inside?
If your Panasonic Washer has an unusual amount of water inside, check the water supply. Also, listen for the sound of water from the inlet valve.
Why is my Panasonic NA-F902B making an unusual loud noise?
If your Panasonic Washer is making a loud noise during washing, the belt or motor may be the cause. Also, check the installation of the appliance.
Why is my Panasonic Washer leaking water?
If your Panasonic Washer has a water leak, it could be due to something clogged, causing water to leak from the drain pipe. Alternatively, water may be leaking at the bottom of the machine because of the drain pipe or pulsator.
Why is my Panasonic NA-F902B working incorrectly?
If your Panasonic Washer is working incorrectly: * Water is supplied during spinning because of an unbalanced tub or leaning. * The washer rinses more than 3 times because of an unbalanced tub or leaning. * The pulsator spins despite no water due to a clogged air pipe. * You cannot change the function program. This is related to the description of usage. * Water does not flow out of a filter. This is related to the description of usage. * There is no overflow during water filling as rinsing. This is related to the description of usage. * The selected washing program cannot be memorized. This is related to the description of usage. * Fabric softener flows away too fast. This is related to the description of usage. * The pulsator spins in a short range as washing and rinsi...
Guides on connecting the water supply hose and hose extension.
Instructions for connecting the water supply hose to the faucet.
A table listing problems, corresponding devices, and potential causes.
Lists common symptoms and their non-trouble related causes.
General| Type | Top Load |
|---|---|
| Capacity | 9 kg |
| Color | White |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Water Level | Automatic |
To Next Page