To Next PageTo Next PageHow to prevent softener spills in Panasonic NA-F90T1 drawer?
If softener spills from the drawer of your Panasonic Washer, ensure you keep the softener level below the indicated line to prevent immediate overflow. Also, avoid closing the drawer forcefully.
Why my Panasonic NA-F90T1 Washer does not run?
If your Panasonic Washer doesn't run, try these steps: * Check for a power failure. * See if the power fuse has blown or the breaker is activated. * Make sure the power plug is fully plugged in. * Ensure the 'power switch' is pressed. * Verify the water faucet is turned on. * Confirm the [START/HOLD] button has been pressed. * Check if the machine is programmed under the [RESERVE] timer.
How to fix Panasonic NA-F90T1 when water is not supplied?
If water is not being supplied to your Panasonic Washer, start by checking if the water faucet is turned on and if the water supply has been cut off. Also, inspect the water supply hose connection for any clogs with dirt. Ensure that the lid is closed properly.
Why is my Panasonic NA-F90T1 Washer tub not filling with water when I start the rinse cycle?
If, when starting with the rinse cycle on your Panasonic Washer, the tub doesn't fill with water, the machine will first drain any existing water in the tub. After the spin cycle finishes, the tub will then fill with water.
Why is the water level too high in my Panasonic NA-F90T1 Washer?
If the water level in your Panasonic Washer seems too high for the amount of laundry, it could be because the laundry was already soaked before starting the wash, or there was water in the tub beforehand.
What to do if Panasonic NA-F90T1 has water supply failure?
If you experience water supply failure with your Panasonic Washer, the water may become muddy. Detach the water feeding hose, turn on the faucet to release the muddy water, then reattach the hose and start washing.
Why does water drain from my Panasonic NA-F90T1 even when filled manually?
If water drains from your Panasonic Washer even when filled by a bucket, avoid leaving the machine powered on for more than 15 seconds without starting a cycle. Fill water while the machine is powered off or after pressing the start button.
Why is my Panasonic Washer tub shaking with a water sound?
This sound from your Panasonic Washer is the liquid to maintain balance during spinning.
Why does my Panasonic NA-F90T1 Washer start filling with water in the middle of the wash?
If your Panasonic Washer is filling with water mid-cycle, especially at the HIGH water level with a large laundry load, this is normal. The machine fills automatically when the water level goes down.
Why does my Panasonic Washer buzzer sound when I open the lid during rinsing or spinning?
If you open the lid of your Panasonic Washer during cascade rinsing or spinning and hear a buzzer, this is a reminder not to put your hand or any object into the tub. It is not a malfunction. To turn off the buzzer, simply close the lid.
General| Fuzzy Logic | Yes |
|---|---|
| Child Lock | Yes |
| Frequency | 50 Hz |
| Type | Top Load |
| Capacity | 9 kg |
| Motor | Inverter |
| Voltage | 220 V |
Ensure proper grounding, plug insertion, and avoid damaged cords or water contact to prevent electric shock.
Keep away from heat sources, flammable liquids, and burning objects to prevent fire hazards.
Avoid self-repair, touching spinning parts, and overloading the machine to prevent injury or damage.
Labels and identifies key parts like the lid, tub, pulsator, and detergent drawer.
Steps for checking installation and listing included accessories.
How to use the machine's sensors to determine laundry load and detergent levels.
Recommended amounts of different detergent types based on water level and laundry load.
Instructions for adding liquid detergent to the designated inlet.
Guidelines for using liquid and powder bleach, including for specific courses.
Instructions for adding softener, including quantities and notes on storage.
Proper methods for dissolving and using powdered detergents.
Instructions for reusing wash water for two loads to save resources.
Advice on preparing laundry, cleaning stains, and using laundry nets.
Explanation of the various buttons and indicators on the washing machine's control panel.
Understanding the water level indicator and time display for cycle monitoring.
How to select different washing courses using the PROGRAM button.
Suitable for normal washing of casual laundry, with automatic load sensing.
For fast washing with small laundry loads, using a fixed 18L water level.
For lightly soiled laundry or quick washes, with adjustable time settings for wash, rinse, and spin.
For slow, gentle washing of blankets using a high water level.
Instructions on folding blankets and using laundry nets for safe washing.
For washing soft laundry, with specific time and water level settings.
Designed for washing out sauce and condiment stains, with bleach usage.
For heavily soiled laundry, allowing for soaking times before the main wash.
Allows scheduling the wash to finish between 2 to 24 hours from the current time.
Customizing wash, rinse, spin, and water level settings before setting a reserve time.
An emergency alarm mode to prevent children from opening the lid during operation.
How to disable or activate the end-of-cycle buzzer.
Flexibility to select specific wash, rinse, and spin phases for tailored laundry care.
Prevents fungus growth in the tub using bleach, requires 2.5 hours operation.
Dries the tub to prevent fungus growth, operates for 30 minutes.
Cleaning the water supply hose filter and lint filters for optimal performance.
Instructions for cleaning the exterior of the machine and the upper part of the tub.
Action to take if the spinner tub does not stop within 15 seconds after opening the lid.
Avoid spraying water, using vinyl covers, charger stands, magnets, and excess detergent.
Awareness of knocking sounds due to unbalanced laundry and auto-correction.
Guidance on selecting a suitable location and avoiding damp or direct sunlight.
Ensuring the power plug is fully inserted and establishing a proper ground connection.
How to adjust the machine's legs to ensure it is level and stable.
Detailed steps for attaching the water tap adaptor and supply hose securely.
Recommendations for drain hose extension length and height to prevent issues.
Instructions for repositioning the drain hose from right to left side.
How to securely connect an external drain water hose to the machine.
Steps for installing the bottom cover for safety precautions.
Explains causes for water filling mid-wash, incorrect levels, and sudden draining.
Addresses problems like operation changing to rinsing, buttons not working, or no water supply.
Explains what to do for power failure, tub shaking, or prolonged operation.
Interpreting error codes (U11, U12, U13, U14, U99, H01) and their solutions.
Technical details including voltage, power, capacity, and dimensions for NA-F90T1 and NA-F80T1.
