Convenient Functions Maintenance
11
Water supply fi lter
If water does not fl ow smoothly
● Follow the procedure below to prevent
splashing of water.
1
After turning off both hot and
cold water faucets
Turn the
power on.
2
Select Hot or Warm.
3
Start.
4
After approx. 40 seconds
Turn the power off.
5
Loosen the nut and remove
the hose.
6
Remove the fi lter and remove
dirt on the fi lter.
Water supply fi lter
7
Reattach the fi lter to this
original position.
Main unit, lid
If stained with detergent or softener
Wipe with a soft cloth.
(To prevent damage to resin parts or metal corrosion)
● For heavy soil, wipe with a neutral kitchen detergent.
● Do not splash water.
Tub
Once a week <Air Dry>
1
After operation ends
Run the Air Dry program without
loading laundry.
(P. 9)
Once a month <Tub Hygiene>
Preparation: Turn on both hot and cold water faucets.
1
Without loading laundry
Turn the power on.
2
Press.
3
Start.
When the tub is fi lled with water
Pause.
4
Put bleach in the tub.
● Use whiten bleach
(drum cleaning detergent
commercially available).
Approx. 200 ml
5
After closing the lid
Start.
After approx. 2 hours
and a half, tub cleaning
ends.
Softener case
Wash with water.
■
How to remove
After pulling the case
all the way out, pull it
obliquely upward to
remove it.
OM_NA-F95A1,F85A1.indd 11OM_NA-F95A1,F85A1.indd 11 11/14/2560 BE 2:57 PM11/14/2560 BE 2:57 PM
To Next Page
Loading...
