12
Installation
1. Check the location.
■
Avoid the following locations for installation.
•
Damp locations or locations where it may be exposed to rain, etc. (To prevent electric shock or fi re)
•
Uneven or unstable locations (on blocks, timbers, a table with wheels,
etc.)
•
Locations with a possibility of freezing
■
Keep the washing machine at least 10 cm away from the wall to
minimise noise.
2. Attach the bottom cover.
1
Insert the bottom cover along the guides.
2
Fix with a screw.
Screw
B
A
Water supply
hose
Bottom cover Drain hose
Elbow
Holes for the
hose holder
Water supply
valve screw
COLD
HOT
COLD HOT
Water supply
hose
To Next Page
Loading...
