Panasonic NA-FS95A1WAU

Questions and Answers:

J
Jill FrenchAug 12, 2025
Why is my Panasonic NA-FS95A1WAU not supplying water?
- A
  Alexa DorseyAug 12, 2025
  If your Panasonic Washer is not supplying water, it could be due to several reasons: the water faucet might not be turned on, there could be a water outage, or the water supply filter might be clogged with dirt. If the water level drops, water is added automatically. With a large amount of laundry, water is added several times automatically. If laundry is wet or there is water in the tub before operation, the water level may be higher. With light clothes (of synthetic fibre, etc.), the water level may be lower.
A
amanda65Aug 19, 2025
Why is water supplied in the middle of wash process in my Panasonic NA-FS95A1WAU Washer?
- J
  Joshua MartinAug 19, 2025
  If water is supplied in the middle of the wash process in your Panasonic Washer, it could be normal. If the water level drops, water is added automatically. With a large amount of laundry, water is added several times automatically. If laundry is wet or there is water in the tub before operation, the water level may be higher. With light clothes (of synthetic fibre, etc.), the water level may be lower.
S
sarah54Aug 27, 2025
How to change process settings after start-up on Panasonic Washer?
- J
  Jacqueline TurnerAug 27, 2025
  If you cannot change process settings on your Panasonic Washer after starting it, a possible cause is a power failure. Process settings can be changed during the wash cycle by pressing “Pause”. If you want to change the program or settings after the wash cycle has ended, turn the power off and then on again.
L
lindsayarroyoSep 4, 2025
Why does the time indication increase or not decrease on my Panasonic NA-FS95A1WAU Washer?
- J
  Jennifer RoseSep 4, 2025
  The operation time of your Panasonic Washer may be longer than indicated if the laundry is concentrated on one side, or if the water supply or drainage is not functioning correctly.