Panasonic NA-FS95A1 - User Manual

Questions and Answers

D
Daniel MaloneAug 12, 2025
Why is my Panasonic Washer not supplying water?
- C
  Cynthia WatkinsAug 12, 2025
  If your Panasonic Washer is not supplying water, it could be due to several reasons: the water faucet might not be turned on, there could be a water outage, or the water supply filter might be clogged with dirt. If the water level drops, water is added automatically. With a large amount of laundry, water is added several times automatically. If laundry is wet or there is water in the tub before operation, the water level may be higher. With light clothes (of synthetic fibre, etc.), the water level may be lower.
J
Jessica WatsonAug 19, 2025
Why is water supplied in the middle of wash process in my Panasonic NA-FS95A1 Washer?
- Z
  Zachary FrenchAug 19, 2025
  If water is supplied in the middle of the wash process in your Panasonic Washer, it could be normal. If the water level drops, water is added automatically. With a large amount of laundry, water is added several times automatically. If laundry is wet or there is water in the tub before operation, the water level may be higher. With light clothes (of synthetic fibre, etc.), the water level may be lower.
T
Todd WhiteAug 27, 2025
How to change process settings after start-up on Panasonic Washer?
- D
  Daniel TuckerAug 27, 2025
  If you cannot change process settings on your Panasonic Washer after starting it, a possible cause is a power failure. Process settings can be changed during the wash cycle by pressing “Pause”. If you want to change the program or settings after the wash cycle has ended, turn the power off and then on again.
E
Evan SmithSep 3, 2025
Why does the time indication increase or not decrease on my Panasonic Washer?
- A
  Ashley AvilaSep 3, 2025
  The operation time of your Panasonic Washer may be longer than indicated if the laundry is concentrated on one side, or if the water supply or drainage is not functioning correctly.