To Next PageTo Next PageWhy does my Panasonic NA-FS10X7 Washer start rinse instead of spin?
If your Panasonic Washer starts rinsing instead of spinning, it's likely due to an imbalance in the load. The appliance automatically corrects this by initiating a rinse process to redistribute the clothes.
What to do if my Panasonic NA-FS10X7 Washer is not working?
If your Panasonic Washer is not working, ensure the lid is closed properly, the power is on, the power plug is fully inserted, and you've pressed the 'Start' button. Also, check that the breaker is on.
Why is there irregular rotation in my Panasonic NA-FS10X7 Washer?
If you see irregular rotation in your Panasonic Washer, it's because the tub rotation speed is automatically adjusted to reduce vibration.
What happens if there is a power failure/breaker off during Panasonic NA-FS10X7 Washer cycle?
If the power fails or the breaker trips during a wash cycle, don't worry. Your Panasonic Washer will automatically resume the operation from where it stopped once the power is restored.
Why is water supplied while the water level drops in my Panasonic NA-FS10X7?
If you notice that water is being supplied while the water level is dropping in your Panasonic Washer, this is normal. The washer automatically adds water if the laundry load is large.
How to fix approximate time indication on Panasonic NA-FS10X7 Washer?
To address the approximate time indication on your Panasonic Washer, check for power failures and timer preset settings.
Covers warnings about child use, tub, wet hands, cord, and electrical safety.
Instructions on power cords, sockets, grounding, dust, and flammable materials.
Precautions regarding finger entrapment, climbing, and hand/foot safety.
Guidance on faucet use and hose sets to prevent leaks.
Warnings against sunlight, waterproof items, hot water, and obstructions.
Identifies and labels the main components of the washing machine.
Lists and illustrates the accessories provided with the appliance.
Steps for preparing laundry and performing pre-wash checks.
Instructions on separating laundry to avoid colour transfer.
Explains how to change settings and use indicators on the control panel.
Details water level selection and recommended detergent amounts.
Overview of the different washing programs available on the panel.
A step-by-step guide to operating the washing machine.
Instructions on setting a delayed start time for the wash cycle.
Details on Normal, Speedy, Delicate, Baby Care, Water Save, and Blanket programs.
Explains programs for specific stains like Sweat, Mud, and Soya/Sauce.
Describes the Air Dry and Tub Hygiene functions.
Guidance on using bleach for whitening clothes safely.
How to correctly use powder detergent, liquid detergent, and softener.
How to set the delayed start timer for the washing operation.
Explains how to modify wash, rinse, and spin settings.
Details for the Delicate program, including capacity and water levels.
Details for the Blanket program, including capacity and material types.
How to prepare laundry and select the StainMaster program.
Maximum load capacity and operational notes for StainMaster.
How to use the Air Dry function and its limitations.
Explanation of ECONAVI, lamp indicators, and activation.
Instructions for running the tub cleaning cycle.
How to enable and disable the child lock feature.
Procedure to cancel or reset the end-of-cycle buzzer.
Method for turning the tub by hand.
Details total time, wash, rinse, and spin cycles for programs.
Specific timings for Stain Master programs like Sweat and Mud.
Step-by-step guide for cleaning the lint filter after each use.
Instructions for removing and cleaning the detergent/softener drawer.
How to clean the water inlet filter if water flow is poor.
Instructions for weekly Air Dry and monthly Tub Hygiene cycles.
Guidelines for choosing a suitable location and avoiding installation hazards.
Advises against self-installation and recommends professional service.
Instructions for attaching the bottom cover and external drain hose.
Detailed steps for connecting the water supply hose securely.
How to connect the power plug and ensure proper grounding.
Procedure to level the machine by adjusting the legs.
Steps for a trial run to check the machine after installation.
Troubleshoots the U11 error related to drainage issues.
Addresses the U12 error code indicating the lid is not properly closed.
Explains the U13 error, often due to load imbalance.
Troubleshoots the U14 error indicating no water is being supplied.
Describes the U99 error, often related to child lock and drainage.
Indicates the Hxx error code, signaling the need for professional service.
Solves issues with the time indication increasing or not decreasing.
Troubleshoots why the machine fails to start or operate.
Addresses problems changing program settings after the cycle begins.
Explains issues with water supply during washing and incorrect water levels.
Solves problems like spin changing to rinse or rinse starting incorrectly.
Explains how the machine handles irregular rotation and vibration.
What happens after a power failure and how operation resumes.
Troubleshooting steps when the StainMaster program is ineffective.
Solutions for powder detergent not dissolving properly.
Provides key technical data like voltage, capacity, dimensions, and weight.
General