What to do if my Panasonic Washer does not start?
If your Panasonic Washer isn't starting, make sure the lid is completely closed, the power fuse hasn't blown or the breaker hasn't tripped, the power plug is fully inserted, the water faucet is turned on, you've pressed “Start,” and the timer isn't preset.
Why is there no water supply to my Panasonic NA-FS16V5 Washer?
If your Panasonic Washer isn't getting water, check if the water faucet is turned on and if there is a water outage. Also, the water supply filter may be clogged with dirt.
Why does my Panasonic NA-FS16V5 Washer start with rinse when I only want spin?
If clothes are concentrated on one side of the tub in your Panasonic Washer, the machine automatically corrects unevenness by starting the rinse process. Place clothes as evenly as possible.
Why does my Panasonic Washer take longer than indicated, and not stop?
The operation time of your Panasonic Washer may be longer if the laundry is concentrated on one side, or if the water supply or drainage isn't working properly.
Why is the 'Stain Master' program not working on my Panasonic NA-FS16V5?
The “Stain Master” program may not remove stains on your laundry if pretreatments have not been performed, the amount of laundry is over 5.0 kg, or the “Stain Master” program is not selected according to the type of stains.
How to change process settings after start-up on Panasonic NA-FS16V5?
To change process settings on your Panasonic Washer during the wash process, press “Pause”. To change the program or settings after the end of the wash process, turn the power off and on again.
What happens if there is a power failure with my Panasonic NA-FS16V5 Washer?
If there was a power failure or the breaker tripped, your Panasonic Washer will resume operation from where it stopped when the power is recovered (Auto Restart).
What to do after a water outage with my Panasonic Washer?
When water supply is recovered, remove the water supply hose from your Panasonic Washer, release turbid water from the faucet, and then start the washing machine.
Why does the time indication increase or not decrease on my Panasonic Washer?
The time indication on your Panasonic Washer is approximate. The remaining time is corrected during operation and displayed.
Why is water supplied in the middle of the wash process on my Panasonic Washer?
If the water level drops in your Panasonic Washer, water is added automatically. With a large amount of laundry, water is added several times automatically.
Instructions on how to adjust water level during the wash process.
Explanation of indicators for water amount and estimated remaining time.
Steps for starting the wash, including adding detergent and closing the lid.
Guidance on using the program for removing tough stains like sweat, mud, and sauce.
Instructions for connecting the drain hose securely to the basin.
Procedure for connecting the water supply adaptor and hose to the faucet.
Resolving problems with time indication, operation duration, and stopping.
Addressing water supply issues and unexpected process changes during operation.
Troubleshooting spin irregularities and sudden changes to rinse cycles.
Solutions for power failure, water outage, program effectiveness, and noise.
General| Type | Top Load |
|---|---|
| Capacity | 16 kg |
| Weight | 45 kg |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Wash Programs | 10 programs |
To Next Page