8
Operation Panel
Preset
Set the time to finish washing
(in hours). ( lights.)
e.g.) 8 hours later
z Setting range:
2 - 24 hours later, in one-hour
increments.
(4 - 24 hours later for the
“Soak” program)
z Not available for the
following programs:
“Gentle Hand Wash”,
“Comforter”, “Tub Hygiene”,
“Super Dry”
Change water amount
During the wash process,
press “Water Level” to
check and change the
water amount.
z Some water amounts
cannot be selected
depending on the
program.
Water amount/remaining time
After starting
operation, indicates
the water amount
according to the
amount of laundry.
After approx.
5 seconds, indicates
the approximate
remaining time
(min).
Temp Setting
For washing, cold water can be mixed
with hot water. Press the button to select
Hot/Warm/Cold. (P. 14)
Do not use water hotter than 60 ºC.
z The estimated water temperature in
the tub during wash process (when hot
water is 50 ºC, and normal water is
20 ºC):
Hot approx. 40 ºC
Warm approx. 30 ºC
z Lamp indications
Lighted: Hot/Warm/Cold is set.
Flashing: Hot water is being supplied.
z Not available for the following
programs:
Gentle Hand Wash, Tub Hygiene, Super Dry
Super Dry (P. 18) Child Lock lamp (P. 20) Start/Pause
To Next Page
Loading...
