Why is my Panasonic Dryer not working?
If your Panasonic Dryer isn't working, check the power supply. Specifically, verify that the power plug is properly inserted into the socket. Also, ensure that the power is turned on, the 'Start/Pause' button is pressed, and the dryer door is properly closed. It could also be due to a power failure, a blown fuse, or a tripped circuit breaker.
What to do if the buttons on my Panasonic Dryer do not work?
If the buttons on your Panasonic Dryer aren't responding, it could be because settings cannot be changed during drying. To adjust them, turn off the dryer and restart it for setting. Also, check whether the child lock is turned on.
What to do if some clothing has residual moisture after using Panasonic Dryer?
If you notice some clothing has residual moisture after drying in your Panasonic Dryer, try reducing the amount of laundry you're drying at once. You can also turn the clothes over and dry them again, and make sure to dry clothes of similar thickness together.
How to prevent clothes from wrinkling in my Panasonic Dryer?
If your clothes are coming out wrinkled from the Panasonic Dryer, make sure you're selecting the right drying program for the type of clothes you're drying. Also, check whether there are too many clothes in the drum.
How to reduce static electricity in Panasonic NH-EH90JD1WA?
To reduce static electricity in synthetic clothes after drying in your Panasonic Dryer, add fabric softener when rinsing the clothes.
Why is there cotton lint on clothes after using Panasonic NH-EH90JD1WA Dryer?
If you find cotton lint on your clothes after using the Panasonic Dryer, make sure the filter is cleaned before putting in clothes. Separately dry clothes that are prone to generate lint or are prone to be stained with lint. Also, confirm there are no articles in clothes pocket.
Why does the running sound change in my Panasonic NH-EH90JD1WA?
This is normal. This sound change in your Panasonic Dryer is caused by the compressor and the drainage pump turning on and off.
Why does the remaining time displayed change on my Panasonic NH-EH90JD1WA?
This is normal. The remaining time on your Panasonic Dryer is continuously calculated and adjusted during operation.
Why is the filter light flashing on my Panasonic NH-EH90JD1WA?
This is not a failure. The filter clogging warning light will flash at the end of the drying process to remind you to clean the filter of your Panasonic Dryer.
What does the ' ' display mean on my Panasonic NH-EH90JD1WA Dryer?
This is not a failure. The ' ' display after the program is completed on your Panasonic Dryer is used to remind you that drying is completed, but the temperature in the inner drum is high, and air will be supplied for cooling for a maximum of 3 hours.
General| Dryer Type | Heat Pump |
|---|---|
| Capacity | 9 kg |
| Color | White |
| Delay Start | Yes |
| Child Lock | Yes |
| Anti-Crease Function | Yes |
| Heat Pump Technology | Yes |
| Programs | Cotton, Synthetics, Delicates |
To Next Page
