Why is my Panasonic Washer/Dryer not working?
Several factors could prevent your Panasonic Washer/Dryer from working. Check the following: * Ensure the fuse hasn't blown or the breaker hasn't tripped; replace or reset if needed. * Make sure the mains plug is firmly connected to the mains socket; reconnect it securely if it's loose. * Verify that you've pressed the On button and the Start button. * Confirm that the door is properly closed.
Why is my Panasonic Washer/Dryer taking so long to dry?
Several factors can cause prolonged drying times with your Panasonic Washer/Dryer. The laundry might be too wet, so spin the laundry before drying. The laundry may have become tangled, so untangle it. Overloading the machine can also extend drying times, so reduce the load to an appropriate weight. Separate fast-drying and slow-drying clothes. Also, ensure that the ambient air temperature is adequate; increase it if it's too low.
What to do if buttons do not work on Panasonic Washer/Dryer?
If the buttons on your Panasonic Washer/Dryer aren't working, try switching the appliance off and on again, then reset the settings. Also, check if the Child Lock is activated and deactivate it.
What to do if my laundry is not sufficiently dried in Panasonic Washer/Dryer?
If your laundry isn't drying completely in your Panasonic Washer/Dryer, avoid adding laundry during the drying cycle. Untangle the laundry to ensure proper air circulation. Reduce the load size if it's too heavy. For small synthetic fibre loads, use the Warm Timed programme or dry them with larger items. Clean the moisture sensors, as they may be dirty.
Why does drying repeatedly start and stop on Panasonic Washer/Dryer?
This is not a malfunction; the drum slowly rotates and stops repeatedly when the “Anti-crease” function has been set on your Panasonic Washer/Dryer.
How to reduce static electricity after drying in Panasonic Washer/Dryer?
To reduce static electricity charges in your Panasonic Washer/Dryer when drying synthetic fibres, add fabric conditioners to wash loads during the final rinse cycles.
What to do if button fell through filter hole in Panasonic Washer/Dryer?
To retrieve a small item, such as a button, that has fallen through the filter frame hole in your Panasonic Washer/Dryer, open the panel in front of the heat exchanger unit, similar to when you clean the fine filter.
Guidelines for safe operation, including warnings for children, chemicals, and electrical hazards.
Detailed instructions for connecting the appliance to the power supply, including fuse replacement.
Step-by-step guide to setting up and starting a drying programme.
Step-by-step guide to cleaning the fluff filter after every drying programme.
Monthly procedure for cleaning the fine filter located in the heat exchanger unit.
A list of common problems and their potential causes and solutions.
Explanation of error codes displayed by the appliance and what to do.
Instructions for connecting the power supply and water drain hoses, including lead lengths.
General| Drum volume | 107 L |
|---|---|
| Control type | Buttons, Rotary |
| Display type | LED |
| Loading type | Front-load |
| Drying system | Heat pump |
| Product color | White |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Cycle time | 170 min |
| Noise level | 65 dB |
| Drying class | B |
| Drum capacity | 8 kg |
| Number of drying programs | 16 |
| Energy consumption | 1.67 kWh |
| Power consumption (off) | 0.18 W |
| Annual energy consumption | 212 kWh |
| Package depth | 680 mm |
| Package width | 710 mm |
| Package height | 880 mm |
| Package weight | 64000 g |
Weight and Dimensions| Depth | 582 mm |
|---|---|
| Width | 597 mm |
| Height | 845 mm |
| Weight | 58000 g |
| Depth with door open | 602 mm |
To Next Page
