FABRIC IRONING CHART
NOTES: 1 . Check garment for specific ironing instructions. Always follow manufacturer's
instructions.
2. Iron blended fabrics at setting for lower-temperature fiber.
3. Use caution, some synthetics may melt at high temperature.
Temperature
Control
Pad
Setting
Fabric
Ironing Recommendations
LOW
ACRYLIC
*
ACRILAN
*
CRESLAN
*
ORLON
ACETATE
METALLICS
SUEDE
Dry iron on reverse side,
or use a press cloth on
lUp
Ul IctUIIL.
L/Ull I
bpilMKIC
Walcl
UllcLlly
UN
fabric to avoid spots.
To
iron
suede,
cover ironing board with brown
paper and
use
it
as a
press cloth.
NYLON
*
ANTORON
*
CAPROLAN
Oil IS
bILK
Dry iron on reverse side.
MED
PERM. PRESS
RAYONS
POLYESTER
*
DACRON
*
FORTREL
*
KODEL
TRIACETATE
*
ARNEL
W'n W COTTON
Dry iron on reverse side. To
touch-up collars,
cuffs, pockets,
etc.,
lightly iron the surface.
WOOL
VELVET
Steam ironing is
suggested.
Never iron until completely dry,
but
leave it with
a
little
moisture. To
iron
velvet, use steam
but
do
not let the iron touch the fabric. Hold
it
slightly above
the surface.
HIGH
COTTON
Steam ironing is suggested. Sprinkle water on the fabric,
depending on its thickness. Iron dark
fabrics
on reverse
side to avoid unwanted sheen.
LINEN
Steam ironing is suggested. Iron dark fabrics on reverse
side to avoid unwanted sheen.
*
Trademarks
of
Fiber Manufacturers.
Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
One Panasonic Way,
Secaucus,
New Jersey 07094
http://www.panasonic.com/contactinfo
Panasonic Puerto Rico, Inc.
Ave.65 de Infanteria. Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
http://www.panasonic.com/consumersupport
©
2007
Matsushita Electric Industrial Co., Ltd. All rights reserved.
PWHAEIG 07
05-01
Printed in China
-12-
To Previous Page
Loading...
