Panasonic NI-W810CS User Manual

HOW TO CARE FOR YOUR IRON
AFTER EACH USE
1. Set the Temperature Selector Dial to" Off
2. Turn the iron off and unplug.
3. Empty the iron immediately after using.
Do not store the iron with water in it.
4. Move the Steam/Dry Selector into the Dry position.
If the Steam/Dry Selector is not in the Dry position after using, remaining
water will move into the Soleplate and damage the Soleplate and
may result in burns during the next initial use of the iron.
5. Wait until the iron has cooled before storing it, and always
set it on the Heel Rest to protect the Soleplate from
scratches, corrosion or stains.
OUTSIDE SURFACE OF IRON
After unplugging and cooling the iron, simply wipe off with a damp cloth
and if necessary, use a mild detergent.
NEVER USE ANY HARSH CLEANERS.
SOLEPLATE
Starch and other residue may be easily removed from the Soleplate with a damp cloth.
To avoid scratching the finish never use a metallic pad to clean the Soleplate, and never
place the iron on a rough surface.
If synthetics are ironed at too high a temperature, not only is the fabric usually ruined, but
the iron Soleplate is often covered with the melted remains of the synthetic fabric.
The best way to remove synthetic residue from the Soleplate is to heat the iron and to iron
over an old cotton cloth.
A caution"
Never use steam iron cleaners in the iron, since they may damage the working parts of
the iron.
SPECIFICATIONS
Model
NI-W810CS NI-W750TS NI-W450TS
Power Source
120 V ~ 60 Hz
Power Consumption
12.5 A, 1 500 W
Net Weight
3.1 lb (1.4 kg)
-ii-

Panasonic NI-W810CS Specifications

General

Type	Dry & Steam iron
Product color	Grey, Silver
Variable steam	Yes
Number of programs	5
Water tank capacity	0.19 L
Steam boost performance	- g/min
Iron power	1500 W
AC input voltage	120 V
AC input frequency	60 Hz
Ironing board included	No
Non-twisting cord	-
Dimensions (WxDxH)	275 x 150 x 124 mm

Weight and Dimensions

Weight	1360 g
Package weight	1633 g