Panasonic NI-WL600

Model
NI-WL600
Power Source
120 V ~ 60 Hz
Power Consumption
12.5A, 1500W
Net Weight
4.4 lb (2.0 kg)
FABRIC IRONING CHART
NOTES: 1. Check garment for specific ironing instructions. Always follow manufacturer's
instructions.
2. Iron blended fabrics at setting for lower-temperature fiber.
3. Use caution, some synthetics may melt at high temperature.
Temperature
Control Pad Setting
Fabric
Ironing Recommendations
LOW
ACRYLIC
* ACRILAN
* CRESLAN
* ORLON
ACETATE
METALLICS
SUEDE
Dry iron on reverse side, or use a press cloth on
top of fabric. Don't sprinkle water directly on
fabric to avoid spots.
To iron suede, cover ironing board with brown
paper and use it as a press cloth.
NYLON
* ANTORON
* CAPROLAN
SILK
Dry iron on reverse side.
MED
PERM. PRESS
RAYONS
POLYESTER
* DACRON
* FORTREL
* KODEL
TRIACETATE
* ARNEL
W'nW COTTON
Dry iron on reverse side. To touch-up collars,
cuffs, pockets, etc..., lightly iron the surface.
WOOL
VELVET
Steam ironing is suggested. Never iron until completely dry,
but leave it with a little moisture. To iron velvet, use steam
but do not let the iron touch the fabric. Hold it slightly above
the surface.
HIGH
COTTON
Steam ironing is suggested. Sprinkle water on the fabric,
depending on its thickness. Iron dark fabrics on reverse
side to avoid unwanted sheen.
LINEN
Steam ironing is suggested. Iron dark fabrics on reverse
side to avoid unwanted sheen.
* Trademarks of Fiber Manufacturers.
-11 -