– 17 –
1. Plug in.
Plug into a properly earthed electrical outlet. "REFER TO OPERATING INSTRUCTIONS BEFORE USE" will
appear in the display window, then you can start to operate.
2. Press
twice to set clock.
Set clock as a 12 hour clock. Turn dial to select the time, then press Timer/Clock. )See page 18 for details(
3. Press
.
“ ” will appear in the display window with the oven temperature. This procedure is to burn off the oil
used for rust protection in the oven. Press Convection button until 220 °C appears in the display window.
Remove all accessories from the oven.
4. Turn Dial to Select Time.
Turn dial until 5 minutes is displayed in the window.
5. Press .
The time will be displayed in the window and count down. The oven will beep at the end of the program.
The oven is now ready to use.
Caution: heating elements and oven will be hot.
Let’s Start To Use Your Oven!
To Use Child Safety Lock
This feature allows you to prevent operation of the oven by a young child; however, the door will open. This
feature can be set when colon or time of day is displayed.
To set: To cancel:
Press Stop/Reset button 3 times.
► “ ” appears in the display
window.
Press Stop/Reset button 3 times.
► Colonortimeofdayappearsin
the display window.
Press 3 times. Press 3 times.
To set or cancel child lock, Stop/Reset button must be pressed 3 times within a 10 second period. Child Lock
can be set when a colon or the time of day is displayed.
To Next Page
Loading...
