English
- En-8 -
To Reheat/Defrost/Cook on
Microwave
How do I program Power and Time?
1 Press and select Micro Power
Level.
e.g. Press 4 times for
MEDIUM.
2 Set Cooking Time using the
Time / Weight Dial.
(HIGH up to 30 minutes
others up to 1 hour and
30 minutes)
Time can be entered
10 second intervals up to
5 mins then 1 min intervals.
3 Press.
Cooking starts.
Cooking time in the display
begins to count down.
NOTES:
1. For 2 or 3 stage cooking, repeat steps 1 and 2
above before pressing Start Pad.
2. Micro Power Pad :
No. of taps Power Level Power
1 HIGH 1000 W
2 DEFROST 350 W
3 MED HIGH 700 W
4 MEDIUM 550 W
5 MED LOW 350 W
6 LOW 100 W
To Cook using
the Time/Weight Dial
This feature allows you to set cooking times at micro
power “HIGH” easily.
Example: To cook at HIGH Power for 5 minutes.
1 Set cooking time.
(Up to 30 minutes)
Cooking time appears in the
display window.
•
2 Press.
Cooking starts.
The time in the display
window begins to count down.
•
NOTE:
This feature is not available for 2 or 3 stage cooking.
To Defrost by
Turbo Defrost Pad
This feature allows you to defrost meat, poultry and
seafood by weight. Weight must be programmed in
kilograms and tenths of a kilogram.
1 Press.
2 Set the weight using the
Time / Weight Dial.
(up to 3.0 Kg)
Weight can be entered in
0.1 Kg intervals.
3
Press.
Defrosting time appears in
the display window and
begins to count down.
NOTE:
Stand time or power level may be programmed after
Turbo Defrost.
To Change
the Cooking Time
While operating, you can change the cooking time.
1. Press the Function Pad you set.
2. Change the cooking time to desired amount by
using the Time/Weight Dial.
While a light of Dial turns on, setting is possible.
(Turn off the light in 1 minute)
When a light disappeared, press the Function Pad
you set again.
You can change the oven temperature for Convection
cooking.
NOTE:
This feature is not available for Sensor Reheat or
Auto Menu or Turbo Defrost.
NN-CD997S-HP_eng.indd 8 2007/09/10 13:25:51
To Next Page
Loading...
