Need help?Do you have a question about the Panasonic NN-CT555W and is the answer not in the manual?
General| Brand | Panasonic |
|---|---|
| Model | NN-CT555W |
| Category | Microwave Oven |
| Language | English |
Critical safety warnings for service personnel regarding electrical shock and injury.
Specific hazards of the high voltage inverter, including heat, static charge, and improper grounding.
How the inverter controls microwave power output using PWM signals.
How the inverter converts AC to high voltage DC for the magnetron.
Sequence for automatic cooking programs like Turbo Defrost and Auto Cook.
Role of the thermistor in monitoring magnetron temperature and enabling power down.
How the digital programmer controls the heater for oven cavity temperature.
Explanation of how grill cooking is achieved using upper heaters.
Essential safety checks like grounding and handling high voltage components.
Detailed warnings about high voltage, heat, and discharge of capacitors in the inverter.
Guidelines for safely replacing components, including unplugging power and discharging capacitors.
Steps to ensure the appliance is safe and functional after repairs, including leakage checks.
Step-by-step guide for safely removing and replacing the magnetron.
Procedure for removing and replacing the D.P.C. board, including grounding.
Steps for replacing the low voltage transformer and power relays on the D.P.C. board.
Instructions for removing and replacing the cooling fan motor.
Procedures for disassembling and reassembling the oven door, including hinge adjustment.
Guide for removing and replacing the turntable motor.
Steps to remove and replace the quartz heater element.
Procedure for removing and replacing the convection fan assembly.
Detailed steps for removing and replacing the high voltage inverter power supply unit.
How to test the continuity of primary/secondary latch switches and power relay RY1.
Procedure for testing the continuity of the short switch under different door conditions.
Method to check magnetron filament continuity and case isolation.
Tests to diagnose the inverter power supply, including input current checks.
How to test the temperature thermistor's resistance and display reading.
Procedure for adjusting latch switches and door hook assembly for proper operation.
Simple method to measure microwave output power by temperature rise of water.
Diagnosing and correcting issues when the oven stops mid-cycle.
Diagnosing common problems like no display, fan motor issues, timer problems, and low output.
Diagnosing problems related to the inverter circuit and magnetron using failure codes.
A quick method to identify issues between the inverter and magnetron using an ammeter.
Using an OHM meter to test diodes, transistors, and IGBTs.
A list of main components for the High Voltage Inverter unit.
To Next Page