English
- Eng-21 -
Auto Cook Setting and Menus
This feature allows you to set some ordinary menus with different weights. It will cook automatically without setting power and
time. Press Auto Menu to select the desired menu and the corresponding menu will appear in the display window.
For menus 1-15, please operate as follows:
1. Press Auto Menu pad to
select the desired menu.
For menus 16-20, please operate as follows:
* indicates the wire rack or oven tray should be used during cooking and placement of the tray.
Without Preheating:
* indicates the wire rack or oven tray should be used during cooking and placement of them.
2. Set serving/weight by
using Time/Weight dial.
3. Press Start pad.
The cooking time appears
in the display window and
begins to count down.
With Preheating:
1. Press Auto Menu
pad to select the
desired menu.
2. Set serving/weight by
using Time/Weight dial.
3. Press Start pad to begin
preheating. After preheating,
please put the oven tray with
food into the shelves within 2
minutes, then close the oven
door immediately.
4. Press Start pad.
The cooking time
appears in the display
window and begins to
count down.
After preheating, the oven
will beep,
put the food into the oven
immediately.
Note:
Do not open the door during preheating. After preheating, the oven will beep and the “P” will flash in the display window. If the
oven door is not opened after preheating, the oven will maintain the selected temperature. After 1 hour, including preheating,
the oven will shut off automatically and revert to colon or time of day.
IP4579_3BG40HP_Eng_27_130530.indd 21IP4579_3BG40HP_Eng_27_130530.indd 21 2013-5-30 14:25:232013-5-30 14:25:23
To Next Page
Loading...
