Control panel NN-DF383B
Note
If an operation is set and start button is not
pressed, after 6 minutes the oven will
automatically cancel the operation� The
display will revert back to clock mode�
1 Display window
2 Microwave power levels button
3 Turbo defrost programs button
4 Grill button
5 Auto sensor programs button
6 Oven power button
7 Auto weight programs button
8 Time / Weight selection dial
9 More button
10 Less button
11 Memory button
12 Timer button
13 Stop /Cancel button:
Before Cooking:
One press clears your instructions
During Cooking:
One press temporarily stops the cooking
program� Another press cancels all
your instructions and the time of day will
appear in the display�
14 Start button
This oven is equipped with an energy
saving function�
Please note
1� When in stand-by mode the brightness
of the display will be reduced�
2� The oven will enter stand-by mode,
when rst plugged in and immediately
after the last operation has completed�
Beep sound
When a button is pressed correctly a beep
will be heard� If a button is pressed and no
beep is heard, the unit has not or cannot
accept the instruction� At the end of any
complete program, the oven will beep 5
times�
1
4
6
9
11
13
3
5
7
10
12
14
8
2
To Next Page
Loading...
