Panasonic NN-DF383B - Auto Sensor Programs; Plus;Minus Cooking Adjustment

26
27
EN
Using the memory function
To set a memory program
This feature allows you to pre-program your oven for a regular reheating or cooking task. You
are able to pre-program your oven for a specic power level and time that is convenient for
you. You can only pre-program one memory task with this oven.
Press Memory.
The oven is automatically pre-set
to memory�
1� To select memory 2 press
memory button twice� To select
memory 3 press memory button
three times�
Press Memory.
The oven is automatically pre-set
to memory�
1� To select memory 2 press
memory button twice� To select
memory 3 press memory button
three times�
Program the desired
cooking program.
Press Memory to store
this task or press Start
to start cooking in this
sequence.
Press Start to begin cooking
 Notes
1� Auto programs cannot be programmed into memory�
2� Memory can only store 1 stage cooking� It is not possible to store 2 or 3 stage
cooking�
3� Setting a new cooking program into memory will cancel the cooking program
previously stored�
4� Memory program will be cancelled if the power supply is off or the plug is
disconnected�
To use a memory program
OR