English
- Eng-32 -
Sensor Reheat (Beverage) Setting
Notes:
1. For the beverage, the reheat field is 1-4 cups (200 ml/cup). After reheating, stir carefully. Do not cover or wrap. Arrange the
containers as figure.
2. Do not using straight-sided containers with narrow necks, and liquids under 200 ml.
3. If the temperature of the cavity is too high, sensor reheat feature can not be used. Display window will appear " ".
Sensor reheat feature can be used again until the " " disappear.
This feature allows you to reheat beverage (coffee, tea, etc.) from room temperature or fridge temperature without setting
power and time, only according to the temperature as your require. The field is 40~70°C.
1 cup
3 cups
2 cups
4 cups
oven door
position
Container
1. Press twice.
" " symbol and
"2" will appear in the
display.
5. Press once. The temperature you set will
display. After detecting for a period of time,
press Reheat pad and the approximate
current temperature will appear in the
display window for 3 seconds.
(unnecessary step)
2. Set the required Serving by
using the dial. Number and
"serv" will appears in the
display. (1 ~ 4 serv)
4. Set the required temperature by
using the dial.
3. Press once to verify
your selection.
F0003BU01HP_Eng.indd 32F0003BU01HP_Eng.indd 32 2016/9/14 14:36:152016/9/14 14:36:15
To Next Page
Loading...
