English
- Eng-45 -
Cleaning Setting (continued)
29. Cavity Cleaning Setting:
This feature is available when the cavity is built up with fat or grease (20 minutes is needed).
Notes:
1. Full the tank with water before using.
2. After cleaning, open the door and wipe with a damp cloth.
1. Turning the dial clockwise
until menu number "29"
and " " symbol appear
in the display windows.
2. Turning the dial clockwise
until menu number "28"
and " " symbol appear
in the display windows.
3. Press Start pad.
The cooking time
appears in the display
window and begins to
count down.
4. Press Start pad.
The cooking time
appears in the display
window and begins
to count down. The
program will run for
approx. 29 minutes.
6. Press Start pad.
The program will run for approx.
1 minute. Empty the drip tray
after the program has finished.
2. Press once to verify
your selection.
3. Press once to verify
your selection.
28. System Cleaning Setting:
The first stage of this program cleans the system with a citric acid solution. The second stage runs water through the system to
rinse the pipes.
1. Make a solution of
16 g citric acid and
200 g of water, add
the solution to the
water tank. Ensure
drip tray is empty.
After the program has
paused, empty the drip tray
and fill the steam tank with
water (to max level).
Notes:
1. When " " appears in the display, run the ‘system cleaning’ program.
2. If the system cleaning program is not used regularly, the pipe will get blocked and the steaming performance will be less
effective.
3. Do not remove the drip tray during the drain program.
4. Empty the drip tray and rinse with running pure water after the program has finished.
F0003BU01HP_Eng.indd 45F0003BU01HP_Eng.indd 45 2016/9/14 14:36:172016/9/14 14:36:17
To Next Page
Loading...
