Panasonic NN-GD371M - Setting Kitchen Timer, Standing Time, and Delay Start

- Eng-14 -
English
Operation (Setting Timer)
Set the desired
cooking program.
(up to 2 stages)
Set the desired
cooking program.
(up to 2 stages)
To Use as a Kitchen Timer
To Set Standing Time
To Set Delay Start
NOTES:
1. If oven door is opened during the Standing Time, Delay Start or Kitchen Timer, the time in the Display Window will continue
to count down.
2. Delay Start/Standing Time cannot be programmed before/after any Auto Control function. This is to prevent the standing
temperature of the food from rising before defrosting or cooking begins. A change in the starting temperature could cause
inaccurate results and / or food may deteriorate.
3. Multi-stage cooking can be programmed induding Standing Time/Delay Start.
Press once. Press Start.
Time will count down
without oven operating.
Set desired amount of time by
turning Time/Weight Dial.
(up to 90 minutes)
Press once. Press Start.
Cooking will start.
After cooking, standing
time will count down
without oven operating.
Set desired amount of standing
time by turning Time/Weight Dial.
(up to 90 minutes)
Press once. Press Start.
Delayed time will count
down. Then cooking will
start.
Set desired amount of delay time
by turning Time/Weight Dial.
(up to 90 minutes)
IP3914_3BB22HP_Eng_05_120625.indd 14IP3914_3BB22HP_Eng_05_120625.indd 14 2012-6-25 10:26:112012-6-25 10:26:11