Panasonic NN-GT351W - Feature Diagram

English
- Eng-5-
Feature Diagram
1
Oven Window
2
Door Safety Lock System
3
Pull Door Handle
Pull to open the door. Opening the door during cook-
ing will stop the cooking process without cancelling
the program. Cook resumes as soon as the door is
closed and Start Pad is pressed. It is quite safe to
open the door at any time during a cooking program
and there is no risk of Microwave exposure.
4
Control Panel
5
Glass Tray
a. DO NOT operate the oven without the Roller Ring
and Glass Tray in place.
b. Only use the Glass Tray specifically designed for
this oven. Do not substitute any other Glass Tray.
c. If the Glass Tray is hot, allow to cool before clean-
ing or placing in water.
d. DO NOT cook directly on the Glass Tray. Always
place food on a microwave-safe dish, or on a rack
set in a microwave-safe dish.
e. If food or utensil on the Glass Tray touches oven
walls, causing the tray to stop moving, the tray will
automatically rotate in the opposite direction. This is
normal.
f. Glass Tray can rotate in either direction.
6
Roller Ring
a. Roller Ring should be cleaned regularly to avoid
excessive noise.
b. Roller Ring and Glass Tray should be used at the
same time.
7
Identification Plate
8
Oven Air Vent
9
Waveguide Cover (do not remove)
0
Wire Rack
-
Warning Label
=
Power Supply Cord
~
Power Supply Plug
Note:
The illustration is for reference only.
=
1
2
5
--782
69
4
~
3
0
j
1
8k 5
k7
6
4
m
l
9
2
2
3
English