10
Control Panels
NN-SD277S / NN-SD268M / NN-SD258W*
(1) Display Window
(2) Auto Weight Reheat Programs
(3) Auto Weight Defrost Programs
(4) Auto Weight Cook Programs
(5) Time / Weight Selection dial
(6) Microwave Power Levels
(7) Delay/Stand pad
(8) Clock pad
(9) Stop/Cancel Pad:
Before Cooking:
one press clears your instructions.
During Cooking:
one press temporarily stops the cooking
program. Another press cancels all your
instructions and the time of day will
appear in the display.
(10) Start Pad
Beep Sound:
When a pad is touched
correctly a beep will be heard.
If a pad is touched and no
beep is heard, the unit has not
or cannot accept the
instruction. At the end of any
complete program, the oven
will beep 5 times. Time or
colon appears.
(1)
(2)
(5)
(6)
(9)
(3)
(4)
(7)
(8)
(10)
NOTE:
If an operation is set and Start
Pad is not pressed, after 6
minutes, the oven will
automatically cancel the
operation. This display will
revert back to clock mode.
* The design of your control
panel may vary from the panel
displayed (depending on
colour), but the words on the
pads will be the same.
To Next Page
Loading...
