Do you have a question about the Panasonic NN-SD377S and is the answer not in the manual?
Convection | Yes |
---|---|
Dimensions (WxDxH) | 483 x 363 x 282 mm |
Power requirements | 120V, 60Hz, 10.5A |
Auto programs quantity | 8 |
Control type | Buttons |
Product color | Stainless steel |
Door open type | Push |
Turntable size | 245 mm |
Microwave power | 800 W |
Number of power levels | 6 |
Connected load | 1230 W |
Weight | 11800 g |
---|
Schematic diagram for the APH model, detailing electrical components and connections.
Schematic diagram for the CPH model, illustrating its electrical layout and components.
Ensuring proper grounding is imperative before beginning repair work on the microwave.
Warning about residual electric charge in the high voltage capacitor after power off.
Instruction to remove the power plug from the outlet before replacing any parts.
Procedure for when the 15 Amp fuse blows due to short switch operation.
Caution against inserting nails or wires through unit holes to prevent microwave leakage.
Ensuring all screws are tight, connections are secure, and checking for microwave leakage.
Procedure for adjusting primary latch switch, secondary latch switch, and short switch.
Method for measuring microwave output power using a simple water heating test.
List of necessary equipment for measuring microwave radiation leakage.
Detailed steps for performing a microwave radiation leakage test.
Procedure for measuring leakage with the outer panel detached.
Procedure for measuring leakage on a fully assembled microwave oven.
Guidelines for recording leakage readings and notifying authorities if leakage exceeds limits.
Recommendation to have the radiation monitor checked for calibration annually.
Diagram showing the assembly of the microwave oven with numbered parts.
Comprehensive list of all parts with their corresponding part numbers and descriptions.
Detailed list and diagram of components specific to the oven door assembly.
List of wiring harnesses and connectors used in the microwave assembly.
List of components related to the control panel and escutcheon base assembly.
Details on packaging materials and included accessories for the microwave oven.
Detailed schematic diagram of the digital programmer circuit board.
List of components for the digital programmer circuit board.