13
Child Safety Lock
Setting the Clock
Example: To set 11:25 a.m. or p.m.
1.
• Press Clock once.
➤ Colon flashes.
2.
• Enter time of day using
the number pads.
➤ Time appears in
the display window;
colon continues
flashing.
3.
• Press Clock.
➤ Colon stops flash-
ing; time of day is
entered.
NOTES:
1. To reset the clock, repeat steps 1-3.
2. The clock will retain the time of day as
long as the oven is plugged in and
electricity is supplied.
3. Clock is a 12 hour display.
4. Oven will not operate while colon is
flashing.
This feature prevents the electronic oper-
ation of the oven until cancelled. It does
not lock the door.
Starting to Use
Your Oven
1.
• Plug into a properly
grounded electrical
outlet.
The oven automatical-
ly defaults to the impe-
rial measure system
(oz/lb).
2.
• Press Start to convert
to metric. Verify your
selection in the dis-
play window.
Display Window
If you wish to
use metric
system (g/kg):
3.
• Press Stop/Reset.
➤ Colon appears in
the display window.
To Set:
• Press Start 3 times.
The indication light
appears in the display
window.
➤The indication light
continues to be
displayed until Child
Safety Lock is can-
celled. Keypads
may be pressed but
the microwave will
not start.
To Cancel:
• Press Stop/Reset 3
times.
➤ The display will
return to colon or
time of day when
Child Safety Lock
has been cancelled.
NOTE:
You can set the Child Safety Lock feature
when the display shows a colon or time of
day.
To Next Page
Loading...
