Panasonic NN-ST69KS - Add Time; Keep Warm

15
Operation (continued)
Add Time
(This feature allows you to add cooking time at the end of previ-
ous cooking. )
Keep Warm
(Will keep food warm for up to 30 minutes after cooking)
1
After cooking, press Add Time
Button.
2
Add cooking time by pressing
the Time Buttons. Maximum
cooking time: Microwave:
P10 up to 30 minutes; other
powers up to 99 minutes and
50 seconds.
3
Press Start. Time will be added.
The time in the display window
will count down.
NOTES:
1. This function is only
available for Microwave,
Keep Warm and Timer.
2. The Add Time function will
be cancelled if you do not
perform any operation for
1minute after cooking.
3. The Add Time function can
be used after the 3-stage
cooking.
4. The power level is the same
as the last stage.
1
Press Power Level 11 times to
select the P0 (KEEP WARM).
2
Set warming time using Time
Buttons, up to 30 minutes.
Set 20 minutes cooking for an
example.
3
Press Start; the cooking will start
and the time will count down
in the display. At the end of
cooking, five beeps will sound.
NOTES:
1. After pressing Start , the
selec ted power level can
be recalled. Hold Power
Level for 2 seconds, then
the display window will
indicate the power level
and keep for 2 seconds.
2. P0 (KEEP WARM) can be set
as the final stage after cook
time has been manually
entered. It cannot be used
with Automatic function
(such as Sensor Reheat,
Coffee/Milk, Turbo Defrost,
Popcorn and Sensor Cook ).