Panasonic NR-BV360Q - Temperature Control (Fine Adjustment Mode); Quick Freezing

Quick Freezing
Temperature control (Fine adjustment mode)
The refrigerator is specially designed for approriate use, which can adjust the temperature
level to detailed 9 levels with the following details.
How to operate the ne adjustment mode
For the Freezer room
1. Press the button “Select” until LED “Freezer” turns on .
2. Set LED display to “Min” with the “Temp. Control” button.
3. Press and hold the “Temp. Control” button (for a few seconds) until the LED display
return to show at “Med” position.
4. Set “9 levels” mode following below table mentioned by pressing the “Temp. Control” button.
 LED Display table
For the Fridge room
Operate above 1 ~ 4 steps with selecting “Fridge” area instead of “Freezer” area.
To reset the setting ne adjustment mode
Repeat step 1 ~ 3, then the refrigerator return to normal operation mode.
Remark:
●-3
o
C cold storage room does not have ne adjustment mode.
●Temperature control varies depend on the changing of environment and food storage quantity.
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
Cooling level
Minimum
Maximum
Lighting
Blinking
Not lighting
LED Display
Levels
9
How to operate the “Quick Freezing” mode
●Press the button “Select” until the LED “Freezer” turns on, then press “Temp Control” until the
LED “Quick Freezing” turns on. “Quick Freezing” mode starts after 10 seconds.
Remark:
●If you want to stop the operation immediately, repeat the procedure until the LED “Quick
Freezing” turns off.
●The system will stop the operation automatically when it runs for 60 mins (as ambient
temperature is below 18
o
C) or 150 mins (as ambient temperature is above 18
o
C) and return
to normal mode (the LED “Quick Freezing” turns off.)
●The LED “Quick Freezing” ashing means that the defrosting system is now working. “Quick
Freezing” mode will start right after the defrosting operation is nished.