Panasonic NR-BY551VS

- 22 -
NR-BY551 / NR-BY601
11.2 Cover Control
11.3 PCB Control
- Take off Cover sheet at PC door by use cutter as Fig. 1.
- Take off screw at PC door by use screwdriver as Fig. 2.
- Push Cover control up and try to push it in front slowly for locks loose as Fig. 3.
- Take off Lead wire socket which contact at PCB control as Fig. 1.
- Take off screw at PCB control as Fig. 2.
- Use screwdriver push up PAS-Control for loosing from locks slowly and prevention crack as Fig. 3.
Fig. 1 Fig. 2 Fig. 3
Fig. 1 Fig. 2 Fig. 3