35
Preparations for Editing
Recording VCR
(the NV-DV2000)
1 Turn on the VCR.
2 Set Edit Terminal to 8mm.
3 Press INPUT SELECT so that A3 or A4 is
selected.
≥ If the playback unit is connected to the external
input on the rear of the NV-DV2000, select A2.
≥ Press INPUT SELECT so that DV1 or DV2 after
sliding DV SELECT to 1 or 2, is selected.
≥ When performing Audio Dubbing, Audio Mixing
or AV Insert, select A2, A3 or A4.
Playback Unit
(a Video Equipment with a LANC socket)
1 Turn on the Video Equipment.
2 Set the unit so that it is ready to be controlled.
≥ Read the operating instructions of the playback
unit and make the necessary settings.
To Next Page
Loading...
