Panasonic NV-DV2000EC - Manual Editing Timing Adjustment; Manual Copying Timing Adjustment; Start Editing Timing Adjustment

Helpful Hints
55
Manual Editing
If there is a deviation in the results of a manual editing
operation, the timing of the edit start (In) position on the
playback unit can be adjusted by approximately d1
second. Perform the procedure described below when
setting an edit start point in any editing mode.
Example: Manual Copying
1 Press EDIT MENU.
2 Press 34 (CURSOR)
to select Copying, and
then press OK.
3 Press 34 (CURSOR)
to select Timing Adjust,
and then press OK.
4 Adjust the timing for the
edit start point by setting
the amount of the
discrepancy for the
start-up time.
≥ The setting is displayed in frames
(1/25 of a second) units.
Press 1 (CURSOR) if the start point is too
early; Press 2 (CURSOR) if it is too late.
≥ Each time the button is pressed, the tape
moves by 1 frame.
≥ Corrections can be made in the range of
d30 frames.
5 Press OK.
6 Press 34 (CURSOR)
to select Start Copying
(Insert, Dubbing), and
then press OK.
≥ If the results of editing
indicate that the
adjustment is
inadequate, repeat
steps 3–5.
On Screen Display
DIGITAL VCR
Timing Adjust
0f
Mark In
–
r
Copying
∫ PLAYER
RECORDER ∫
Start Copying
Timing Adjust
Copying
∫ PLAYER
RECORDER ∫
Start Copying
Timing Adjust
EDIT MENU
Copying
Video Insert
Audio Insert
AV Insert
Audio Dubbing
Programme Editing
Copying
; PLAYER
RECORDER ∫
Start Copying
Timing Adjust