Panasonic NV-HD675 Series - VCR Controls and Connections; Front Panel Interface

Controls and Connection Sockets
This section describes in detail the function of each button, switch and connection socket.
1 2 3 45 6
Set VCR~-TV switch to VCR for using FRONT
POWER (¢!) and the V and A buttons.
1 POWER /l (POWER 0)
Press to switch the VCR from on to standby mode or
vice versa. In standby mode, the VCR is still connected
to the mains.
Set VCR--TV switch to VCR for using POWER () of
remote controller.
2 EJECT
Ejects a video cassette.
3 Cassette Compartment
Insert a video cassette here.
4 STOP @
Stops playback or recording.
Ejects the video cassette.
5 PAUSE/STILL 4
In the stop mode: Still picture (Jog/Shuttle mode).
During playback:
@By pressing: Still picture. “ pq ” is fit (Jog/Shuttle
mode).
®By pressing for 2 seconds or more:
Slow playback, “ 0D” is tit.
During recording: Interrupts recording.
6 PLAY/OFF >
Starts playback. “>” is lit.
For the Play-Off Timer function.