26
To Cancel the Programming of a Timer
Recording
It is not possible to cancel a programming while the timer
recording is being performed.
≥ Display the VCR picture on the TV.
≥ Set the VCR/TV switch P to “VCR”.
1 Press the PROG./CHECK
button < to display the timer
recording programmings on the
TV screen.
2 Press the Cursor buttons (34) R to select the
programming that you want to cancel.
3 Press the CANCEL button >.
4 Press the EXIT button S to
exit the On Screen Display.
Notes for Cancelling the Programming of a Timer
Recording
In some cases, for example as listed below, the programming
of a timer recording remains stored in the memory until 4 a.m.
the next day. However, this is not a malfunction.
≥ When a timer recording was not performed up to the TV
programme’s ending time because the remaining tape time
was not sufficient.
≥ When you have stopped the timer recording while it was
being performed.
To Check the Total Timer Recording
Programming Time
The total time indication for timer
recording programming lets you
check how many programmes can
be recorded by comparing with the
remaining tape time in the VCR
display.
≥ The total time is calculated in the
SP mode.
≥ The total time cannot be calculated when setting Daily/
Weekly timer recording.
Total (SP) 90
6:07:30 16.10.05
To Next Page
Loading...
