Panasonic NV-SD430 Series - Infra-red Remote Controller; VCR Operation Buttons

The
remote
control
unit
for
this
VCR
is
a
universal
remote
controller.
As
such,
some
of
its
buttons
are
not
used
to
operate
this
VCR.
VCR OPERATION
Set VCRITV switch to VCR for using the
numeric buttons and the G-CODE button.
1. Infra-red Transmitter
2 Numeric Buttons
Selects programme positions (1-99) of the VCR.
eEnsure that VCR/TV switch is set to VCR.
9: ©
19: ®© ~@) ~@®
Programmes G-Code numbers.
eEnsure that VCR/TV switch is set to VCR.
3 OSD
For the On Screen Display Function.
Infra-red
Remote
Controller
4 RESET
Resets
the
tape
counter
(elapsed
time)
to
“0:00.00”.
The
tape
counter
is
automatically
reset
to
"0:00.00"
when
a
video
cassette
is
inserted.
5 [if (PAUSE/SLOW)
During playback:
®By pressing: Still picture. “0” is lit.
®By pressing for 2 seconds or more:
Slow playback. “ 1” is lit.
During recording: Interrupts recording.
6
On
Screen
Display
Menu
Operation
Buttons
MENU:
Makes
the
on
screen
display
main
menu
appear
on
the
TV
screen.
ENTER:
Confirms the selection, or stores.
AV <P:
Makes
selections
from
the
on
screen
display.
These
buttons
can
also
be
used
for
playback,
stop,
rewind
and
fast
forward
mode.
7
Timer
Recording
Operation
Buttons
CH, DATE, ON, OFF:
Programmes a timer recording.
PROGJCHECK:
Sets and checks timer programmes.
CANCEL:
Cancels
the
settings
made
for
timer
recording.
SPEED:
Selects
the
desired
tape
speed
for
recording.
SP gives the best picture quality.
LP
(EP)
gives
the
longest
recording
time.
©The
indicator
(SP,
LP
or
EP)
corresponding
to
the
selected
tape
speed
now
appears
on
the
VCR
display
or on screen display.
LP:
This
appears
when
PAL/MESECAM
signals
are
input or output.
EP:
This
appears
when
NTSC
signals
are
input
or
output.
TIMER REC @:
Turns the timer recording function on and off.
2] is lit or not lit.
Once you operate the timer recording function, normal
VCR
operation
is
not
possible
unless
you
press
this
button again and release the VCR from the timer
recording standby mode.
8 AUDIO OUT
This button is not used to operate this VCR.
9 No function.
This button is not used to operate this VCR.
10 VCRITV switch
VCR:
Selects
the
VCR
operation
mode.
TV:
Selects
the
TV
operation
mode.