5
Display the Main menu
To change audio soundtrack / language.
Press AUDIO during playback. The soundtrack changes
each time you press the button (see page 19).
Call up the OSD-screens
Call up the DVD SETUP menu (see page 18)
Remove the disc.
Press the OPEN/CLOSE button on the unit
or press Stop
``
for more than 3 seconds on the remote control.
Skip chapters or tracks
Note: To preserve the video heads, the following functions are switched off automatically after 5 - 10 minutes : Forward Search (Cue), Backward Search (Review),
Jet Search, Still Playback, Slow Playback. (Distorted pictures and tape transport noises during these functions are not functional faults)
DVD Operations
Playback (indicated by >)
Stop (indicated by `` )
n To stop winding a tape, recording or playback.
Still Playback (indicated by )
n Press this button during playback.
n Resume normal playback by pressing
this button again or Playback > .
Slow Playback
n Keep this button pressed down for more
than 2 seconds during playback.
n Resume normal playback by pressing Playback > .
Fast Forward and
Forward Search
Fast Rewind and
Backward Search
n To select Fast Forward or Fast Rewind,
press these buttons when the video has stopped.
n To briefly watch the picture during Fast Forward or Fast
Rewind, hold down the corresponding button.
n To search press these buttons briefly during playback,
and the search will continue until Playback > is pressed.
Two times pressing increases search speed (JET SEARCH).
n If you keep this button pressed, the search
function will continue until you release the button.
VCR Operations
VCR display
Remove the cassette.
Press the EJECT button on the unit
or press Stop
``
for more than 3 seconds on the remote control.
Display time, Tape counter or Remaining tape time.
Press this button repeatedly.
Reset the Tape counter.
Press this button. When inserting a cassette,
the counter is reset to 0:00.00 .
Forward Search
Backward Search
Slow-motion playback
n Keep this button pressed down while paused.
n Slow playback forward
n Slow playback backward
n Resume normal playback by pressing
Playback > .
Playback (indicated by >)
VHS Index Search Function (see page 8)
Select the VCR channel
and adjust the tracking, see page 23
Call up the top menu of a disc
Call up the menu of a disc
Change the Sound mode.
Press this button repeatedly.
Stereo sound: OSD Display L R
Left channel: OSD Display L
Right channel: OSD Display R
Mono sound: OSD Display - -
Return from DVD SETUP menu to playback
Select language of subtitles (see page 17)
Call up the PLAYLIST menu (see page 15)
ADVANCED SURROUND:
Playback if you are using 2 front speakers
BASS PLUS: If you connected a subwoofer
PICTURE: Enhances detail in dark scenes
DIALOGUE ENHANCER: Increases the volume
of the dialogue sound
Reselect or store this settings
DVD display
Restart from the memorized position
Playback Pause (indicated by )
VCR / DVD Operations
VCR Timer Recording Function
see page 7
Check the VCR recording status. For a moment the Timer
recording menu or an Info box appears on the OSD
(to record see page 7).
VCR Recording Functions
see page 6
VCR Programme List and Intro-Jet Scan Function
see page 8
VCR Timer Recording Functions
see page 6, 7
Repeat Playback (see page 16)
A-B Repeat Playback (see page 16)
VCR Timer Recording and Tape Speed Functions
see page 6, 7
Playback Stop Resume (press button 1x)
Playback Stop (press button 2x)
(indicated by `` )
Select the channel or the Video Plus+ number
Use the numeric buttons.
Example: 18 =
To Next Page
Loading...
