Do not hold the screen
part strongly as shown
Left when moving panel
or TV unit. This may cause
Malfunction or damage.
When lifting the panel or
TV unit, support the panel
as shown left.
Do not hold the screen
part strongly.
Do not hold strongly
< Panel Module > (under studying)
The base metal(chassis) is assembled to
panel module for protection purpose.
It can be apply to repair directly.
Remove the protective sheet and the
protective film after installing the pedestal.
Protective sheet
Base Metal
(chassis)
Handling of Glass Bezel Model
From design concept, there is no chassis for full area. The top/right/left edge area is
glass design. Be careful to handing.
Target model : TX-65/55/49FX74#/75#/78#*, TH/TC-65/55/49FX800*
Glass Bezel
76
*There is a possibility that below specification
will be changed by each factory.
To Next Page
Loading...
